effect of thickness on properties of copper thin films growth on glass by dc planar magnetron sputtering
Authors
abstract
copper thin films with nano-scale structure have numerous applications in modern technology. in this work, cu thin films with different thicknesses from 50–220 nm have been deposited on glass substrate by dc magnetron sputtering technique at room temperature in pure ar gas. the sputtering time was considered in 4, 8, 12 and 16 min, respectively. the thickness effect on the structural, morphological and electrical properties were studied by x-ray diffraction (xrd), atomic force microscope (afm) and four point probe (fpp) measurements, respectively. the results show that by increasing thickness, the copper films crystallinity in (111) direction increases. also by varying the films thickness the significant changes were observed in the films surface morphology due to the mechanism of films growth. finally, the relationship between film resistivity and cu film thickness are investigated in this pap
similar resources
Effect of Thickness on Properties of Copper Thin Films Growth on Glass by DC Planar Magnetron Sputtering
Copper thin films with nano-scale structure have numerous applications in modern technology. In this work, Cu thin films with different thicknesses from 50–220 nm have been deposited on glass substrate by DC magnetron sputtering technique at room temperature in pure Ar gas. The sputtering time was considered in 4, 8, 12 and 16 min, respectively. The thickness effect on the structural, mo...
full textThe Effect of Substrate on Structural and Electrical Properties of Cu3N Thin Film by DC Reactive Magnetron Sputtering
The aim of this paper is to study the effect of substrate on the Cu3N thin films. At first Cu3N thin films are prepared using DC magnetron sputtering system. Then structural properties, surface roughness, and electrical resistance are studied using X-ray diffraction (XRD), the atomic force microscope (AFM) and four-point probe techniques respectively. Finally, the results are investigated and c...
full textGrowth, structural, and magnetic properties of iron nitride thin films deposited by dc magnetron sputtering
FeN thin films were deposited on glass substrates by dc magnetron sputtering at different Ar/N2 discharges. The composition, structure and the surface morphology of the films were characterized using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and atomic force microscopy (AFM). Films deposited at different nitrogen pressures exhibited different structures with different nit...
full textDEPOSITION OF THIN TiO2 FILMS BY DC MAGNETRON SPUTTERING METHOD
Sputter deposition process is another old technique being used in modern semiconductor industries. Sputtering is a process that can deposit TiO2 material on wafer/glass substrates. In this process target is connected to negative high voltage. Further argon gas is introduced into the chamber and is ionized to a positive charge. The positively charged argon atoms are attracted and strike the nega...
full textAlNXOY THIN FILMS DEPOSITED BY DC REACTIVE MAGNETRON SPUTTERING
AlNxOy thin films were produced by DC reactive magnetron sputtering, using an atmosphere of argon and a reactive gas mixture of nitrogen and oxygen, for a wide range of partial pressures of reactive gas. During the deposition, the discharge current was kept constant and the discharge parameters were monitored. The deposition rate, chemical composition, morphology, structure and electrical resis...
full textSuperhard NbB2-x thin films deposited by dc magnetron sputtering
We have deposited weakly textured substoichiometric NbB2-x thin films by magnetron sputtering from a NbB2 target. The films exhibit superhardness (42 ± 4 GPa), previously only observed in overstoichiometric TiB2 thin films, and explained by a self-organized nanostructuring, where thin TiB2 columnar grains hinder nucleation and slip of dislocations and a B-rich tissue phase between the grains pr...
full textMy Resources
Save resource for easier access later
Journal title:
journal of nanostructuresPublisher: university of kashan
ISSN 2251-7871
volume 2
issue 1 2012
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023