synthesis and characterization of the pt/sio2 nanocomposite by the sol-gel method
Authors
abstract
the silica supported platinum nanoparticles was synthesized by using the sol-gel method. the possibility of using diamminedinitro platinum (ii) as pt precursor and effect of metal precursor concentration on the final pt nanoparticle size was investigated. a stable silica sol was prepared via hydrolysis of tetraethyl orthosilicate (teos) as a metal alcoxide and condensation reaction. subsequently, diamminedinitro platinum (ii) was added to sol to form the pt/silica sol. after drying and calcination of the sol, the pt/sio2 nanocpmposite has been obtained. crystallographic information and crystalline size of the synthesized pt/sio2 were determined by x-ray diffraction (xrd) method. morphology of the nanoparticles and hydrogen-bonding interaction between silanol groups and amine ligands were characterized by sem and fourier transform infrared (ftir) spectra, respectively. transmission electron microscopy (tem) was employed in evaluating the distribution and size of the platinum nanoparticles in the silica.
similar resources
Synthesis and characterization of the Pt/SiO2 nanocomposite by the sol-gel method
The silica supported platinum nanoparticles was synthesized by using the sol-gel method. The possibility of using diamminedinitro platinum (II) as Pt precursor and effect of metal precursor concentration on the final Pt nanoparticle size was investigated. A stable silica sol was prepared via hydrolysis of tetraethyl orthosilicate (TEOS) as a metal alcoxide and condensation reaction. Subsequentl...
full textPreparation and Characterization of SiO2-CaCl2 Nanocomposite by the Sol-Gel Method
The SiO2-CaCl2 hybrid porous materials were prepared by the sol-gel method. This process was conducted by the hydrolysis and condensation of Tetraethyl orthosilicate (TEOS) by replacement of ethanol from alcogel and drying at the ambient temperature to obtain xerogel structure. The alcogel samples were synthesized from TEOS, EtOH, H2O, HCl, NH4OH and CaCl2, while the total molar ratio of the co...
full textPREPARATION AND CHARACTERIZATION OF TiO2 Fe2O3 NANOCOMPOSITE BY SOL GEL METHOD
Nanocomposites have improved aspect ratio and better mechanical properties when compared to the composites which had structures less than 100nm They are 1000 times tougher compared to conventional composites. Besides mechanical properties, nanocomposites also have improved electrical conductivity, thermal stability, chemically resistant, flame retardant and low permeability. TiO2 finds its best...
full textSynthesis and Characterization of Doped TiO2 Nanoparticles by the Sol-Gel Method and Investigation of Photocatalytic Activity
Cu2+,Ce3+-doped nanostructure TiO2 -coated Nd3+ (TiO2 /Nd3+) were prepared by sol-gel method. TiO2 were synthesized by the sol-gel method using tetra n-butyl orthotitanat (TBT) as a precursor. The prepared nanoparticles characterized by FT-IR, XRD, SEM- EDS and TEM. The XRD showed that the major phase of nanocomposite is anatase. The morphology of the TiO2/Nd3+/Cu2+and TiO2 /Nd3+/Ce3+ microsphe...
full textSynthesis and Characterization of Nanocomposite Films with a Titania Glass Matrix by the Sol±gel Route
Films of thickness 3 mm containing nanosized metal particles of iron, nickel and copper respectively were grown on a Corning glass slide using a sol-gel technique. The particle sizes had values in the range 6.8 to 20.1 nm. Optical absorption characteristics of different specimens were studied over the wavelength range 230 to 830 nm. An absorption maximum was observed at wavelength varying from ...
full textSynthesis and characterization of Alumina (Al2O3) nanoparticles prepared by simple sol-gel method
Alumina is one of the most widely used ceramic materials as catalysts, catalyst supports and absorbents, and also wear resistant coating. This study focused on fabricating and characterizing of alumina ceramic nanoparticles fabricated using new and simple sol-gel method. Aluminium oxide (Al2O3) nanoparticles were synthesized by iron (III) nitrate 9-hydrate as precursor. Physicochemical properti...
full textMy Resources
Save resource for easier access later
Journal title:
journal of nanostructuresPublisher: university of kashan
ISSN 2251-7871
volume 1
issue 1 2012
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023