photocatalytic reduction of ni (ii) ions using low amounts of titania nanoparticles: rsm modelling, kinetic

Authors

جواد صاین

javad saien department of applied chemistry, bu-ali sina university, hamedan, iran. امیر عزیزی

amir azizi department of applied chemistry, bu-ali sina university, hamedan, iran. علیرضا سلیمانی

ali reza soleymani department of applied chemistry, malayer university, malayer, iran.

abstract

background: heavy metals in aquatic systems usually interfere with many beneficial uses of water. divalent nickel is a commonly occurring toxic metal in natural ecosystems due to the effluent of refineries, electroplating, and casting industries. in aquatic environments, nickel appears as ni (ii) and ni0. despite the high reported toxicity for ni (ii), ni0 is only slightly toxic. various methods have been proposed for the treatment of aqueous solutions containing ni (ii). photocatalytic reduction is an important process titanium dioxide has been mostly used as a very efficient photocatalyst. methods: in this study, the removal of divalent nickel ions in aqueous solutions was studied in the presence of remarkably low dosages of nano-titania photocatalyst. direct imposed irradiation was utilized for treatment of solutions. accordingly, the influence of four operational parameters, including temperature within the conventional range of 20 to 40 °c, was investigated. design of experiments, modeling and process optimization were accomplished using central composite design of response surface methodology. results: reduced quadratic expression was developed for the reduction efficiency (re), and the analysis of variance showed its capability in reproducing the data. the effectiveness of each parameter was determined. at the best found conditions of [tio2] = 42 mg/l, ph = 9.2, t = 34 °c and after 90 minutes of treatment, about 85% removal was achieved for initial 5 mg/l nickel solutions. pseudo first order reactions proceeded. conclusion: based on ccd method, the influence of individual operating parameters and their interactions were obtained. a quadratic equation predicted the variations quite well.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Photocatalytic Reduction of Ni (II) Ions Using Low Amounts of Titania Nanoparticles: RSM Modelling, Kinetic

Background: Heavy metals in aquatic systems usually interfere with many beneficial uses of water. Divalent nickel is a commonly occurring toxic metal in natural ecosystems due to the effluent of refineries, electroplating, and casting industries. In aquatic environments, nickel appears as Ni (II) and Ni0. Despite the high reported toxicity for Ni (II), Ni0 is only slightly toxic. Various meth...

full text

Removal of Ni (II) ions from Aqueous Solutions Using Origanum majorana-Capped Silver NanoParticles Synthesis Eequilibrium

The applicability of Origanum majorana-Capped Silver nanoparticles synthesis for removing Ni (II) ions from aqueous solutions has been reported. This novel material was characterized by different techniques such as FT-IR, XRD and SEM. The influence of nanoparticle dosage, pH of the sample solution, individual ions concentration, temperature, contact time between the sample and the adsorbent wer...

full text

Photocatalytic Coating Using Titania-Silica Core/Shell Nanoparticles

The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica...

full text

Photocatalytic Coating Using Titania-Silica Core/Shell Nanoparticles

The photocatalytic coatings were prepared via incorporating the modified titania nanoparticles into epoxy-based inorganic-organic hybrid coatings. Titania nanoparticles were first synthesized from tetra-n-butyl titanate using sol-gel methods by two different calcination treatments, i.e., in mild condition (80°C) and 500°C. The formed anatase nanoparticles were further modified as Titania-Silica...

full text

Removal of Nickel (II) ions from aqueous solutions using Iron (III) oxide nanoparticles: study of kinetic, isotherm and thermodynamic models

Background and Objective: Due to the existence of industries such as stainless steel, the presence of nickel (II) ions in water and wastewater has been reported at high concentrations. Removal of nickel (II) ions from wastewater and the environment are of primary importance. In this study, iron (III) oxide nanoparticles were studied as an adsorbent for removal of Ni (II) ions from water in the ...

full text

My Resources

Save resource for easier access later


Journal title:
iranian journal of toxicology

جلد ۸، شماره ۲۶، صفحات ۱۱۳۶-۱۱۴۴

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023