fabrication of porous hydroxyapatite-gelatin composite scaffolds for bone tissue engineering
Authors
abstract
background: engineering new bone tissue with cells and a synthetic extracellular matrix represents a new approach for the regeneration of mineralized tissues compared with the transplantation of bone (autografts or allografts). methods: in this study, to mimic the mineral and organic component of natural bone, hydroxapatite (ha) and gelatin (gel) composite scaffolds were prepared. the raw materials were first compounded and the resulting composite were molded into cylindrical shape. using solvent-casting method combined with freeze drying process, it is possible to produce scaffolds with mechanical and structural properties close to natural trabecular bone. glutaraldehyde (ga) was used as cross linking agent. the chemical bonding and the microstructure were investigated by fourier transform infra red (ft-ir), scanning electron microscopy (sem) and light microscopy. results: it was observed that the prepared scaffold has an open, interconnected porous structure with a pore size of 80-400 mµ , which is suitable for osteoblast cell proliferation. the mechanical properties of different weight fraction of ha (30, 40, and 50 wt%) was assessed and it was found that the gel/ha with ratio of 50wt% ha has the compressive modulus of ~10 giga pascal (gpa), the ultimate compressive stress of ~32 mega pascal (mpa) and the elongation of ~3mpa similar to that of trabecular bone. the porosity and the apparent density of 50wt% ha scaffold were calculated and it was found that the addition of ha content can reduce the water absorption and the porosity. since ga is cytotoxin, sodium bisulfite was used as ga discharger. the biological responses of scaffolds carried out by l929 fibroblast cell culture and it was observed that fibroblast cells partially proliferated and covered scaffold surface, 48h after seeding. conclusion: these results demonstrate that the manufactured scaffolds are suitable candidate for trabecular bone tissue engineering.
similar resources
Fabrication of Porous Hydroxyapatite-Gelatin Composite Scaffolds for Bone Tissue Engineering
Background: engineering new bone tissue with cells and a synthetic extracellular matrix represents a new approach for the regeneration of mineralized tissues compared with the transplantation of bone (autografts or allografts). Methods: in this study, to mimic the mineral and organic component of natural bone, hydroxapatite (HA) and gelatin (GEL) composite scaffolds were prepared. The raw mater...
full textFabrication of Porous Hydroxyapatite-Gelatin Scaffolds Crosslinked by Glutaraldehyde for Bone Tissue Engineering
In this study, to mimic the mineral and organic components of natural bone, hydroxyapatite[HA] and gelatin[GEL] composite scaffolds were prepared using the solvent-casting method combined with a freeze drying process. Glutaraldehyde[GA] was used as a cross linking agent and sodium bisulfite was used as an excess GA discharger. Using this technique, it is possible to produce scaffolds with mecha...
full textDevelopment of porous chitosan-gelatin/hydroxyapatite composite scaffolds for hard tissue-engineering applications.
Composite scaffolds prepared from natural polymers and hydroxyapatite (HA) are expected to have enhanced osteoconductive properties and as a result gained much attention in recent years for use in bone tissue-engineering applications. Although there are various natural polymers available for this purpose, chitosan (C) and gelatin (G) are commonly studied because of their inherent properties. Th...
full textdesign and fabrication of biodegradable porous chitosan/gelatin/tricalcium phosphate hybrid scaffolds for tissue engineering
in this study, based on a biomimetic approach, novel 3d biodegradable porous hybrid scaffolds consisting of chitosan, gelatin, and tricalcium phosphate were developed for bone and cartilage tissue engineering. macroporous chitosan/ gelatin/β-tcp scaffolds were prepared through the process of freeze-gelation/solid-liquid phase separation. the results showed that the prepared scaffolds are highly...
full textEngineering new bone tissue in vitro on highly porous poly(alpha-hydroxyl acids)/hydroxyapatite composite scaffolds.
Engineering new bone tissue with cells and a synthetic extracellular matrix (scaffolding) represents a new approach for the regeneration of mineralized tissues compared with the transplantation of bone (autografts or allografts). In the present work, highly porous poly(L-lactic acid) (PLLA) and PLLA/hydroxyapatite (HAP) composite scaffolds were prepared with a thermally induced phase separation...
full textComposite Scaffolds Containing Silk Fibroin, Gelatin, and Hydroxyapatite for Bone Tissue Regeneration and 3D Cell Culturing
Three-dimensional (3D) silk fibroin scaffolds were modified with one of the major bone tissue derivatives (nano-hydroxyapatite) and/or a collagen derivative (gelatin). Adhesion and proliferation of mouse embryonic fibroblasts (MEF) within the scaffold were increased after modification with either nano-hydroxyapatite or gelatin. However, a significant increase in MEF adhesion and proliferation w...
full textMy Resources
Save resource for easier access later
Journal title:
iranian biomedical journalجلد ۱۰، شماره ۴، صفحات ۲۱۵-۲۲۳
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023