electrocatalytic oxidation of ethanol and ethylene glycol onto poly (o-anisidine)-nickel composite electrode
Authors
abstract
in this work, poly (o-anisidine) (poa) was prepared by consecutive potential cycling in an acidic monomer solution at the surface of carbon paste electrode (cpe). nickel ions were dispersed into the polymer by immersing the electrode in niso4 solution. the prepared ni/poa/cpe was characterized by scanning electron microscopy, energy dispersive x-ray spectroscopy, atomic force microscopy (afm) and electrochemical methods. the electrochemical oxidation of ethanol and ethylene glycol was investigated at the ni/poa/cpe by cyclic voltammetry and chronoamperometry techniques. the results indicated that the ni/poa/cpe in comparison with ni/cpe exhibited excellent electrocatalytic activity towards oxidation. then, using a chronoamperometry method, the catalytic rate constant, k, for ethanol and ethylene glycol oxidation were found to be 2.6×106 and 1.07×107 cm3/mol s, respectively. furthermore, the effect of several parameters such as oa concentration, poa thickness, and niso4 concentration and accumulation times towards the ethanol oxidation as well as the long-term stability of the modified electrode has been investigated.
similar resources
Electrocatalytic Oxidation of Ethanol and Ethylene Glycol onto Poly (o-Anisidine)-Nickel Composite Electrode
In this work, poly (o-Anisidine) (POA) was prepared by consecutive potential cycling in an acidic monomer solution at the surface of Carbon Paste Electrode (CPE). Nickel ions were dispersed into the polymer by immersing the electrode in NiSO4 solution. The prepared Ni/POA/CPE was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, Atomic Force Mic...
full textElectrocatalytic oxidation of formaldehyde on novel composite of nickel/triton-x100/poly(o-aminophenol-co-aniline)
Oxidation of formaldehyde (HCHO) is very important, owing to its use in fuel cells. Modification of electrodes surfaces is an excellent way to decrease the overpotentials as well as to increase the current density of the voltammetric response.pt as most efficient metal catalyst can easily be poisoned by product of oxidation and also it has high cost. In this work an efficient and low cost elect...
full textPtIr–WO3 nanostructured alloy for electrocatalytic oxidation of ethylene glycol and ethanol
In this article, we characterized tungsten oxide-decorated carbon-supported PtIr nanoparticles and tested it for the electrooxidation reactions of ethylene glycol and ethanol. Phase and morphological evaluation of the proposed electrocatalytic materials are investigated employing various characterization techniques including X-ray diffraction (XRD) and transmission electron microscopy (TEM). El...
full textElectro-Catalytic Oxidation of Methanol at Ni(OH)2 Nanoparticles-Poly (o-Anisidine)/Triton X-100 Film onto Phosphotungstic Acid-Modified Carbon Paste Electrode
In this work, Phosphotungstic Acid modified Carbon Paste Electrode (PWA-CPE) is used as a substrate for electro-polymerization of o-Anisidine (OA). Also, Triton X-100 (TX-100) surfactant is used as an additive for electrochemical polymerization of OA onto the PWA-CPE, which is investigated as a novel matrix for dispersion of nickel species. The prepared electrodes are characterized by...
full textN O T E S Electrocatalytic Oxidation of Ethanol on Platinum Nanoparticles Modified Polyaniline Electrode
−− The electrocatalytic properties of platinum nanoparticles incorporated into polyaniline films was investigated for oxidation of ethanol in sulfuric acid solutions. The electropolymerization of aniline and the electrochemical depositions of platinum particles into the polyaniline film were achieved by cyclic voltammetry. The effect of the formation conditions of platinum-modified polyaniline ...
full textMy Resources
Save resource for easier access later
Journal title:
iranian journal of chemistry and chemical engineeringجلد ۳۶، شماره ۱، صفحات ۵۹-۷۰
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023