new maximum power point tracking technique based on p&o method

Authors

mostafa alizadeh soltani

islamic azad university centeral tehran branch, iran

abstract

in the most described maximum power point tracking (mppt) methods in the literatures, the optimal operation point of the photovoltaic (pv) systems is estimated by linear approximations. however, these approximations can lead to less optimal operating conditions and significantly reduce the performances of the pv systems. this paper proposes a new approach to determine the maximum power point (mpp) in order to increasing the system efficiently as much as possible. the proposed algorithm is a combination of two loops, set point calculation and fine tuning loops. in first stage, the maximum power is approximated based on the nonlinear modeling of the pv panels by using the set point loop. in second stage, the exact amount of the maximum power will be tracked by the fine tuning loop, which is based on the perturbation and observation (p&o;) method. the proposed method is simulated in matlab/simulink software environment. the simulation results demonstrate that the approach clearly improves the tracking efficiency of the maximum power available at the output of the pv panels. the new method reduces the oscillations around the mpp as well as increases the average efficiency of the obtained mppt. the new mppt method will deliver more power to any generic load or energy storage media

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

New Maximum Power Point Tracking Technique Based on P&O Method

In the most described maximum power point tracking (MPPT) methods in the literatures, the optimal operation point of the photovoltaic (PV) systems is estimated by linear approximations. However, these approximations can lead to less optimal operating conditions and significantly reduce the performances of the PV systems. This paper proposes a new approach to determine the maximum power point (M...

full text

A New Maximum Power Point Tracking Method for PEM Fuel Cells Based On Water Cycle Algorithm

Maximum Power Point (MPP) tracker has an important role in the performance of fuel cell (FC) systems improvement. Tow parameters which have effect on the Fuel cell output power are temperature and membrane water. So contents make the MPP change by with variations in each parameter. In this paper, a new maximum power point tracking (MPPT) method for Proton Exchange Membrane (PEM) fuel cell is pr...

full text

Maximum Power Point Tracking of the Photovoltaic System Based on Adaptive Fuzzy-Neural Method

The aim of this paper was to present an optimized method in order to use maximum capacity of the photovoltaic panels. In this regard, we presented a method for the maximum power point tracking in the photovoltaic systems by using the neural networks and adaptive controller. In the proposed system, we estimated an error by using neural network. If this error is lower than the allowable systems e...

full text

A New Implementation of Maximum Power Point Tracking Based on Fuzzy Logic Algorithm for Solar Photovoltaic System

In this paper, we present a modeling and implementation of new control schemes for an isolated photovoltaic (PV) using a fuzzy logic controller (FLC). The PV system is connected to a load through a DC-DC boost converter. The FLC controller provides the appropriate duty cycle (D) to the DC-DC converter for the PV system to generate maximum power. Using FLC controller block in MATLABTM/Simulink e...

full text

Control Simulation and Experimental Verification of Maximum Power Point Tracking Based on RT-LAB (TECHNICAL NOTE)

The maximum power point tracking (MPPT) control in the Photovoltaic system is the key control technology, however present controller has the disadvantages of long development cycle, high cost and complex verification, and there are some disadvantages carrying out totally physical simulation or totally digital simulation of different control algorithms. This paper carried out design of hardware ...

full text

Maximum power point tracking

In this paper, we present a comparative study of single sensor-based maximum power point tracking (MPPT) techniques for solar photovoltaic (PV) water pumping systems. A conventional hill climbing algorithm is employed to find and track the MPP, using the information obtained from either a voltage sensor or a tachometer or a manometer. The results of experiment are included and explained to vali...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of smart electrical engineering

جلد ۵، شماره ۰۳، صفحات ۱۴۵-۱۵۱

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023