the effect of hot deformation on the microstructure of az91 magnesium alloy
Authors
abstract
due to the great variety of applications of magnesium alloys with superior mechanical properties, recent studies have been focused on the hot deformation behavior and microstructure of magnesium alloy castings. although there have been several recent investigations on the microstructure of wrought magnesium alloys after hot deformation, a limited number of studies have been conducted with regard to the evolution of grain structure during hot working processes. the present work examines the microstructural evolution during hot deformation of magnesium alloy az91. the specimens were hot compressed to the peak strain values of 0.3 and 0.5 at the temperature range of 350 to 425 °c with the strain rate of 0.1 s−1. structural changes were studied using the optical and scanning electron microscopes. the results showed that the recrystallized grains nucleate along the pre-existing grain boundaries during the compression process. the fraction of dynamically recrystallized grains increased with an increase in the strain value in a sigmoidal way expressed by avrami equation. the dynamically recrystallized grain size also increased at the beginning with strain, and then decreased after its maximum value being reached
similar resources
Effect of SiC Nanoparticles on Hot Deformation Behavior and Processing Maps of Magnesium Alloy AZ91
The hot deformation behavior and processing characteristics of AZ91 alloy and nano-SiCp/AZ91 composite were compared at temperature ranges of 523 K-673 K and strain rates of 0.001-1 s-1. Positive impact of SiC nanoparticles on pinning grain boundaries and inhibiting grain growth was not obvious when deformation temperature was below 623 K, but was remarkable when the temperature was above 623 K...
full textA SVM model to predict the hot deformation flow curves of AZ91 magnesium alloy
Abstract In this work, a support vector machine (SVM) model was developed to predict the hot deformation flow curves of AZ91 magnesium alloy. The experimental stress-strain curves, obtained from hot compression testing at different deformation conditions, were sampled. Consequently, a data base with the input variables of the deformation temperature, strain rate and strain and the output variab...
full textthe effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)
cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...
the washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests
در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است
15 صفحه اولA comparative study on constitutive modeling of hot deformation flow curves in AZ91 magnesium alloy
Modeling the flow curves of materials at elevated temperatures is the first step in mathematical simulation of the hot deformation processes of them. In this work a comparative study was provided to examine the capability of three different constitutive equations in modeling the hot deformation flow curves of AZ91 magnesium alloy. For this, the Arrhenius equation with strain dependent constants...
full textthe effect of traffic density on the accident externality from driving the case study of tehran
در این پژوهش به بررسی اثر افزایش ترافیک بر روی تعداد تصادفات پرداخته شده است. به این منظور 30 تقاطع در شهر تهران بطور تصادفی انتخاب گردید و تعداد تصادفات ماهیانه در این تقاطعات در طول سالهای 89-90 از سازمان کنترل ترافیک شهر تهران استخراج گردید و با استفاده از مدل داده های تابلویی و نرم افزار eviews مدل خطی و درجه دوم تخمین زده شد و در نهایت این نتیجه حاصل شد که تقاطعات پر ترافیک تر تعداد تصادفا...
15 صفحه اولMy Resources
Save resource for easier access later
Journal title:
مهندسی متالورژی و موادجلد ۲۳، شماره ۱، صفحات ۰-۰
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023