decolorization of cationic and anionic textile blue dyes from aqueous solution with advanced oxidation process using h2o2 and various catalysts
Authors
abstract
similar resources
Decolorization of Cationic and Anionic Textile Blue Dyes from Aqueous Solution with Advanced Oxidation Process Using H2O2 and Various Catalysts
In this study, we used advanced oxidation process (AOP)for the removal of a cationic and anionic blue dyes, namely Basic Blue 3 (BB3) and Acid blue 62(AB62), from aqueous solutions. Fenton reactions are mixture of H2 O2 and Fe2+. However this paper investigates the application of twelve different catalysts such as: FeCl2 , FeSO4, (NH4 )Fe(SO4 )2 , FeCl3 , Nano iron (Fe0 ), Fe(NO3 )3 , K2FeO4 , ...
full textRemoval of Cationic Dyes from Aqueous Solution using Organomodified Nanoclay
In this work, organomodified nanoclay has been used as the adsorbent for the removal ofbasic blue 41, cationic dye from an aqueous solution. The performance of the organomodified nanoclay was tested in a batch system under varying pH (2–12), adsorbent dosage (0.1–2 g L-1), initial dye concentration (10–60 mgL-1), and contact time (5- 100 min). The best conditions were achieved at pH of 7,...
full textRemoval of Anionic Brown 14 and Cationic Blue 41 dyes via Fenton Process
Textile wastewater contains a number of dyes which are known to be toxic and carcinogenic. In this study the results show that the Fenton (Fe2+/H2O2) process is an efficient method for the removal of Acid Brown 14 (A.BR14) and Cationic Blue 41 (C.B41) dyes from textile wastewater. In this method, two reagents Fe2+and H2O2 are used and do not require any additional energy. Several experiment...
full textDecolorization and Degradation of Basic Blue 3 and Disperse Blue 56 Dyes Using Fenton Process
In this study, oxidative discoloration of Basic blue3 (B.B3) and Disperse blue56 (D.B56) dyes in synthetic textile wastewater has been studied using Fenton (Fe2+/H2 O2 ) process. The Fenton’s technique showed satisfactory color removal efficiency. The operating parameters such as concentration of Fe2+, dose of H2 O2 , initial concentration of dye, time contact, initial volume of wastewater that...
full textDecolorization of Methylene Blue from Aqueous Solution Using Ultrasonic / Fenton Like Process (RESEARCH NOTE)
Docolorization of Methylene Blue was investigating using a Ultrasonic/Fenton like reactor in batch mode. The effects of pH, reaction time, initial concentration of dye, H2O2 and Fe on the dye removal was studied. It was found that the increase of initial dye and H2O2 concentration and the increase of initial pH, are not beneficial for improving the dye removal efficiency. Increasing the dye con...
full textAniline Degradation Using Advanced Oxidation Process by UV/Peroxy Disulfate from Aqueous Solution
This study is focused on removing toxic aniline from aqueous solutions using advanced oxidation process by UV/ peroxy disulfate. In this study, the effect of various parameters including pH (3-9), the level of radiation (ultraviolet 30 watt lamp, number 2-5), peroxy disulfate dose (0.02 – 0.08 mol/l) and the initial concentration (20 – 100 mg/l) at different contact times (10 – 60 min) on the e...
full textMy Resources
Save resource for easier access later
Journal title:
quarterly journal of applied chemical researchPublisher: islamic azad university, karaj branch
ISSN 2008-3815
volume 10
issue 1 2016
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023