an experimental study on the oily wastewaters treatment by polyethersulfone (pes) nanostructure hollow fiber membranes

Authors

gholamreza bakeri

assistant professor, faculty of chemical engineering, babol noshirvani university of technology, babol, iran zeynab fallahnejad

m.sc. in chemical engineering, babol noshirvani university of technology, babol, iran

abstract

oily wastewaters from oil refineries and oil distribution centers are one of the most important environmental concerns in recent decades; therefore, it is critical to treat these types of wastewaters. in this study, the performance of different polyethersulfone hollow fiber membranes in oily wastewaters treatment was investigated and the effects of operating conditions such as transmembrane pressure, oil concentration in the feed and feed cross flow velocity (cfv) on the membrane performance were studied. increasing the pressure makes more membrane compactness and higher membrane fouling; as a result, higher pressure reduces the membrane performance. the optimum operating conditions for oily wastewaters separation are p = 1 bar, low feed concentration (300 ppm) and high feed cross flow velocity (0.18 m s-1). in this study, membrane #m1 with the mean pore size of 8.29 nm, membrane porosity of 77%, permeation flux of 12.4 (l m-2 hr-1) and 100% oil rejection showed the best performance in treating the oily wastewaters.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

An Experimental Study on the Oily Wastewaters Treatment by Polyethersulfone (PES) Nanostructure Hollow Fiber Membranes

Oily wastewaters from oil refineries and oil distribution centers are one of the most important environmental concerns in recent decades; therefore, it is critical to treat these types of wastewaters. In this study, the performance of different polyethersulfone hollow fiber membranes in oily wastewaters treatment was investigated and the effects of operating conditions such as transmembrane pre...

full text

Polyethersulfone Hollow Fiber Membranes for Hemodialysis

Polyethersulfone (PES) is one of the most important polymeric materials and is widely used in separation fields. PES and PES-based membranes show outstanding oxidative, thermal and hydrolytic stability as well as good mechanical and film-forming properties. PES membranes could endure many kinds of sterilized methods, including epoxy ethane gas, steam, and γ-ray. Furthermore, PES-based membranes...

full text

A Comparative Study on the Application of Porous PES and PEI Hollow Fiber Membranes in Gas Humidifcation Process

Humidification process is one of the applications of membrane contactor in which partial pressure of a vapor in the gas stream increases. In this study, two different polyethersulfone and polyetherimide hollow fiber membranes were fabricated and characterized by various test methods and their performance in humidification process under different operating conditions was investigated. The PES me...

full text

Carbon Nanotube/Alumina/Polyethersulfone Hybrid Hollow Fiber Membranes with Enhanced Mechanical and Anti-Fouling Properties

Carbon nanotubes (CNTs) were incorporated into alumina/polyethersulfone hollow fibre membranes to enhance the mechanical property and the efficiency of water treatment. Results show that the incorporation of CNTs can greatly limit the formation of large surface pores, decrease the void size in support layers and improve the porosity and pore connectivity of alumina/polyethersulfone membranes. A...

full text

"modification of polyether sulfone (pes) hollow fiber membranes characteristics for more efficient water treatment process"

membrane technology is used to separate water or solvents from salts or pollutants. this technique could be used for water treatment. for using of polyether sulfone (pes) hollow fiber membranes in water treatment processes, the pes hollow fiber membranes were prepared by dry-wet spinning method and heated in an oven at: 120°c, 150°c and 180°c. the effect of heating on performance of membranes w...

full text

Fabrication of Crosslinkable Hollow Fiber Membranes for Pervaporation Dehydration

Integrally-skinned asymmetric Polyetherimide/Poly (vinyl alcohol) (PEI/PVA) hollow fber membranes for pervaporation dehydration were fabricated by non-solvent induced phase inversion. PVA inside the PEI matrix could be crosslinked to provide membrane performance stability during long term operation. The effects of different PEI/PVA blend ratio, external coagulant type and...

full text

My Resources

Save resource for easier access later


Journal title:
journal of oil, gas and petrochemical technology

جلد ۳، شماره Number ۱، صفحات ۱۴-۲۷

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023