inflow simulation and forecasting optimization using hybrid ann-ga algorithm
Authors
abstract
abstract one of the major factors on the amount of water resources is river flow which is so dependent to the hydrologic and meteorologic phenomena. simulation and forecasting of river flow makes the decision maker capable to effectively manage the water resources projects. so, simulation and forecasting models such as artificial neural networks (anns) are commonly used for simulation and predicting the exact value of such factors. in this research, the dez river basin was selected as the case study. this paper investigates the effectiveness of temperature, precipitation and inflow factors and the lag time of those factors in inflow simulation and forecasting. genetic algorithm (ga) has been thus used as an optimization tool, determining the optimum composition of the effective variables. thus, in a flow simulation and forecasting model, the number of hidden layers, effective neurons in each layer, effective meteorologic and hydrologic parameters and also the lag time of each factor of flow simulation and forecasting has been considered as decision variables, and ga has been used to obtain the best combination of those variables. in this study, minimization of the total mean square error (mse) has been considered as the objective function. results show ga's effectiveness in flow simulation and forecasting with consistent accuracy. the value of r2 criterion has been obtained 0.86 and 0.79 in the simulation and forecasting models, respectively. the results also showed superiority replies obtained from the simulation model to the prediction model. one of the reasons for this superiority can be considering the meteorological factors in the current month in river flow simulation.
similar resources
Forecasting GDP Growth Using ANN Model with Genetic Algorithm
Applying nonlinear models to estimation and forecasting economic models are now becoming more common, thanks to advances in computing technology. Artificial Neural Networks (ANN) models, which are nonlinear local optimizer models, have proven successful in forecasting economic variables. Most ANN models applied in Economics use the gradient descent method as their learning algorithm. However, t...
full textSmart Grid Unit Commitment with Considerations for Pumped Storage Units Using Hybrid GA-Heuristic Optimization Algorithm
A host of technologies has been developed to achieve these aims of the smart grid. Some of these technologies include plug-in electric vehicle, demand response program, energy storage system and renewable distributed generation. However, the integration of the smart grid technologies in the power system operation studies such as economic emission unit commitment problem causes two major challen...
full textModeling heat transfer of non-Newtonian nanofluids using hybrid ANN-Metaheuristic optimization algorithm
An optimal artificial neural network (ANN) has been developed to predict the Nusselt number of non-Newtonian nanofluids. The resulting ANN is a multi-layer perceptron with two hidden layers consisting of six and nine neurons, respectively. The tangent sigmoid transfer function is the best for both hidden layers and the linear transfer function is the best transfer function for the output layer....
full textA Ga–ann Hybrid Model for Prediction and Optimization of Co2 Laser-mig Hybrid Welding Process
The paper presents a hybrid model of an Artificial Neural Network (ANN) and Genetic Algorithm (GA) for modeling of a hybrid laser welding process. This model is employed for the prediction and optimization of penetration depth with corresponding process parameters. A single program developed for the purpose initially establishes an optimized ANN architecture using a Back-Propagation Neural Netw...
full textAn Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
full textAn Optimization on the DIN1.2080 Alloy in the Electrical Discharge Machining Process Using ANN and GA
Electrical Discharge Machining (EDM) process is one of the most widely used methods for machining. This method is used to form parts that conduct electricity. This method of machining has used for hard materials and therefore selects the correct values of parameters which are so effective on the quality machining of parts. Reaching to optimum condition of the DIN1.2080 alloy (D3) machining is v...
full textMy Resources
Save resource for easier access later
Journal title:
آب و خاکجلد ۲۴، شماره ۵، صفحات ۰-۰
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023