prediction of earing in deep drawing of anisotropic aluminum alloy sheet using bbc2003 yield criterion
Authors
abstract
this paper investigates the earing phenomenon in deep drawing of aa3105 aluminum alloy, experimentally and numerically. earing defect is mainly attributed to the plastic anisotropy of sheet metal. in order to control such defect, predicting the evolution of ears in sheet metal forming analyses becomes indispensable. in this regard, the present study implements the advanced yield criterion bbc2003. based on this yield function and the associated flow rule of plasticity, the constitutive model is derived. accordingly, a user material vumat subroutine is developed and adopted in the commercial finite element software abaqus/explicit. several plane stress loading problems are designed, through which, the accuracy of the developed subroutine is verified. in addition, cylindrical cups of aa3105 aluminum alloy are fabricated using a deep drawing die. the earing defect was clearly observed on the recovered parts. using the experimentally obtained constants of bbc2003 yield criterion for this alloy in vumat, deep drawing of the cylindrical cups was simulated. the results demonstrate that the earing profile can successfully be predicted using bbc2003 yield function.
similar resources
Prediction of earing in deep drawing of anisotropic aluminum alloy sheet using BBC2003 yield criterion
This paper investigates the earing phenomenon in deep drawing of AA3105 aluminum alloy, experimentally and numerically. Earing defect is mainly attributed to the plastic anisotropy of sheet metal. In order to control such defect, predicting the evolution of ears in sheet metal forming analyses becomes indispensable. In this regard, the present study implements the advanced yield criterion BBC20...
full textExperimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy
Aluminum alloys have a high strength-to-weight ratio and proper anti-corrosion properties that are used in the automotive, shipbuilding and aerospace industries. The major problem with forming aluminum sheets is the low formability of aluminum sheets at room temperature. Therefore, in the present study, warm deep drawing (WDD) of AA5052-O aluminum alloy sheets with a thickness of 1mm was invest...
full textPrediction of Instability in Planar Anisotropic Sheet Metal Forming Processes
In this paper instability of planar anisotropic sheet metal during a few forming processes is investigated for the first time. For this reason components of the constitutive tangent tensor for planar anisotropic sheets are developed. By using the above tensor location of necking is predicted. Direction of the shear band is also predicted using the acoustic tensor. A finite element program is pr...
full textThe Study of Deep Drawing of Brass-steel Laminated Sheet Composite Using Taguchi Method
Deep drawing process is one of the most applicable methods in producing industrial parts. In this process, the initial blank deforms to final product using a rigid punch and die. In this investigation, the effect of deep drawing process parameters of brass/steel laminated sheet composites on required forming force has been investigated. The process simulated using finite element method (FEM) an...
full textWarm Deep Drawing of Aluminium Sheet
Aluminium sheet drawing processes can be improved by manipulating local flow behaviour by means of elevated temperatures and temperature gradients in the tooling. Forming tests showed that a substantial improvement is possible not only for 5xxx but also for 6xxx series alloys. Finite element method simulations can be a powerful tool for the design of warm forming processes and tooling. Their ac...
full textMinimization of the Sheet Thinning in Hydraulic Deep Drawing Process Using Response Surface Methodology and Finite Element Method
In most of the sheet forming processes, production of the parts with minimum thickness variation and low required force is important. In this research, minimization of the sheet thinning and forming force in the hydraulic deep drawing process has been studied. Firstly, the process is simulated using the finite element method (FEM) and simulation model is verified using the experimental results....
full textMy Resources
Save resource for easier access later
Journal title:
journal of computational and applied research in mechanial engineering - jcarmeجلد ۶، شماره ۲، صفحات ۴۷-۵۵
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023