an experimental study on full toroidal continuously variable transmission system
Authors
abstract
abstract: a continuously variable transmission (cvt) is a transmission which may change step less by way of an infinite variety of effective gear ratios between maximum and minimum values. this contrasts with different mechanical transmissions that solely permit just a few different distinct gear ratios to be selected. continuously variable transmissions (cvts) are mechanical devices that allow a continuous variation of the output velocity by adjusting its geometrical configuration. this offers several advantages over traditional transmissions such as better fuel efficiency, quieter operation, and a lower mass. current efforts to reduce the vehicles, fuel consumption in order to protect the environment and save fuel have seen a recent resurgence in cvt research, especially in the automotive industry. the torque of the continuously variable transmission system with friction drive mechanism is transmitted by contacting roller with input and output disks. for the higher transmitted torque, it is necessary to apply large load in order to get higher friction force, which in turn generates severe high stress on the contact surfaces of roller and disks. the toroidal type cvt system has simple component arrays that have three contact points between roller and each input or output disk to get the torque transmitted this work documents a successfully developed experimental model of a toroidal continuously variable transmission (cvt) by adjusting its geometrical configuration of cvt design and compared the experimental results of speed, torque and power delivered at the output disc with those obtained by a theoretical.
similar resources
Modelling and Optimization of Toroidal Continuously Variable Transmission in ECE Driving Cycle
In the present study, the aim is to optimize full and half toroidal continuously variable transmission (CVT) in order to minimize the vehicle fuel consumption (FC) in ECE driving cycle. First, the model of both CVTs’ efficiency is presented. The control strategy of CVTs speed ratio based on minimizing the vehicle FC is introduced, and the algorithm of calculating the vehicle FC is shown. Afterw...
full textApplication of Multi-objective Optimization for Optimization of Half-toroidal Continuously Variable Transmission
Among different goals defined in vehicle design process, fuel consumption (FC) is one of the most important objectives, which significantly has taken into account lately, both by the customers and vehicle manufacturers. One of the significant parameters which impacts the vehicle FC is the efficiency of vehicle's power train. In this paper, a half-toroidal continuously variable transmission (CVT...
full textControl of a Continuously Variable Transmission System
This paper proposed control strategies for the modern mechatronic Continuously Variable Transmission (CVT) System using three different techniques; The Ziegler-Nichols, Linear Quadratic and Pole-Placement methods. The results of the system responses of the designed control schemes were successfully simulated using MATLAB. Comparing the results showed that controller implemented using the Pole-P...
full textgeometric optimization of half toroidal continuously variable transmission using intelligent techniques
the objective of this research is geometrical optimization of half toroidal continuously variable transmission (cvt) in order to achieve high power transmission efficiency and low weight. after dynamic analysis of the system, the contact between the disk and the roller is modeled according to elasto-hydrodynamic lubrication principles. accordingly, a computer model is created with geometric, th...
full textDesign of Continuously Variable Transmission (CVT) with Metal Pushing Belt and Variable Pulleys
Nowadays, automakers have invested in new technologies in order to improve the efficiency of their products. Giant automakers have taken an important step toward achieving this objective by designing continuously variable transmission systems (CVT) to continuously adapt the power of the engine with the external load according to the optimum efficiency curve of e...
full textMy Resources
Save resource for easier access later
Journal title:
international journal of advanced design and manufacturing technologyجلد ۵، شماره ۱، صفحات ۱۹-۲۳
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023