reducing stress concentration factor around a hole on a plate by piezoelectric patch

Authors

sa'id golabi

javad jafari fesharaki

abstract

using piezoelectric patches the stress concentration around a hole on a plate under tension is reduced and controlled. to attain the reduction in stress two placements for piezoelectric patches is investigated. the first location is top/bottom of the hole with compression induced strain and the second is left/right of the hole with tension induced strains to control the stress flow. the result for two above condition is presented for host plate and piezoelectric patches and by comparing the results the advantages of locating the piezoelectric patches to control the stress flow in the host plate is investigated. the results show that locating the piezoelectric patches at left/right of the hole, to control the stress flow and stress concentration is more effective than locating them at the top/bottom of the hole.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Stress Concentration Factor in a Functionally Graded Material Plate around a Hole

Stress concentration factors have been examined in a functionally graded material (FGM) plate with central holes in different shapes in this essay. The material properties change along the thickness of plate. ABAQUS software has been utilized for modeling of problem in which subroutine of ABAQUS sub-program was used for modeling of the targeted material. The considering shapes for hole in plate...

full text

Stress Concentration Factor in a Functionally Graded Material Plate around a Hole

Stress concentration factors have been examined in a functionally graded material (FGM) plate with central holes in different shapes in this essay. The material properties change along the thickness of plate. ABAQUS software has been utilized for modeling of problem in which subroutine of ABAQUS sub-program was used for modeling of the targeted material. The considering shapes for hole in plate...

full text

Stress intensity factor at the hole-edge cracks tips in a finite plate

In the current research work, the problem of fracture mechanics in a plate with a central hole under tensile loading is studied. The stress intensity factors are calculated for a finite plate containing two symmetrical hole-edge cracks. The problem is solved by two different methods, namely the finite element method and the FRANC software analysis. At first the finite element method is used and...

full text

Stress concentration in a circular hole in composite plate

A non-contact measurement method, namely electronic speckle pattern interferometer (ESPI), was used to investigate the tensile strain field of a composites plate in the presence of stress concentrations caused by a geometrical defect consisting of circular hole. ESPI uses the principle of 3D speckle interferometry to measure the deformation and contour of the measuring field with submicrometer ...

full text

Investigating the Effect of Stiffness/Thickness Ratio on the Optimal Location of Piezoelectric Actuators Through PSO Algorithm

This article has studied the effect of ratio of stiffness and thickness between piezoelectric actuators and host plat has been explored on optimal pattern for placement of piezoelectric work pieces around a hole in thin isotropic plate under static loading to reduce stress concentration. The piezoelectric actuators reduce directly or indirectly the stress concentration by applying positive and ...

full text

Stress Concentration around Countersunk Hole in Isotropic Plate under Transverse Loading

An investigation into the effect of countersunk depth, plate thickness, countersunk angle and plate width on the stress concentration around countersunk hole is carried out with the help of finite element analysis. The variation of stress concentration with respect to these parameters is studied for three types of loading viz. uniformly distributed load, uniformly varying load and functionally ...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of advanced design and manufacturing technology

جلد ۶، شماره ۴، صفحات ۵۹-۶۴

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023