analytical and experimental analysis of axisymmetric deep drawing process

Authors

najmeddin arab islamic azad university, saveh branch

abstract

there are mainly two methods of deep drawing analysis; experimental and analytical/numerical. experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. this approach is less time consuming and more economical.  sheet metal forming often includes biaxial in-plane deformation with non-proportional strain paths. in deep drawing of cylindrical cup, the deformation in the flange in dominated by pure shear deformation, while it changes to plane strain when the material is drawn into the die. this paper deals with the analysis of deep drawing of circular blanks into axi-symmetric cylindrical cup using numerical modeling. the blank drawability has been related both theoretically and experimentally with the initial diameter of the blank and deep drawing parameters. the strains in the radial and circumferential directions have been measured. a correlation on the flange thickness variation by taking into account the work hardening with the analytical and experimental values also has been searched

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Numerical and Experimental Research of Deep Drawing Process

There are mainly two methods of deep drawing analysis; experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. This approach is less time consuming and more econom...

full text

Analytical and Finite Element Analysis of Hydroforming Deep Drawing Process

This paper gives an overview of a deep drawing process by pressurized liquid medium separated from the sheet by a rubber diaphragm. Hydroforming deep drawing processing of sheet metal parts provides a number of advantages over conventional techniques. It generally increases the depth to diameter ratio possible in cup drawing and minimizes the thickness variation of the drawn cup. To explore the...

full text

Computer Aided Process Planning for Non-Axisymmetric Deep Drawing Products

In general, deep drawing products have various cross-section shapes such as cylindrical, rectangular and nonaxisymmetric shapes. The application of the surface area calculation to non-axisymmetric deep drawing process has not been published yet. In this research, a surface area calculation for non-axisymmetric deep drawing products with elliptical shape was constructed for a design of blank sha...

full text

Experimental and Numerical Investigation of Warm Deep Drawing Process of AA5052 Aluminum Alloy

Aluminum alloys have a high strength-to-weight ratio and proper anti-corrosion properties that are used in the automotive, shipbuilding and aerospace industries. The major problem with forming aluminum sheets is the low formability of aluminum sheets at room temperature. Therefore, in the present study, warm deep drawing (WDD) of AA5052-O aluminum alloy sheets with a thickness of 1mm was invest...

full text

experimental and numerical analysis of flange wrinkling of bimetal sheets in deep drawing process

in this paper, formation of wrinkling in bimetal deep drawing process has been investigated by the analytical, numerical and experimental methods. the effects of width of flange, fillet radii of matrix and punch, clearance of blank holder, contact conditions and relative thickness of two sheets on the number and height of wrinkle waves are studied. clearance and contact conditions have the grea...

full text

Finite Element Approach to Analysis of Axisymmetric Reverse Drawing Process

The intention of this research is to make analyze of deep drawing Cr-Ni stainless steel process. The research is related to forces that appear in machine tool during the process and also to material stress and its behaviour. The results are taken from two sources and their comparison is made. The first source of results are experiments made on hydraulic press, and the other source are results o...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of advanced design and manufacturing technology

جلد ۷، شماره ۲، صفحات ۵۹-۶۶

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023