finite element prediction on the machining stability of boring machine with experimental verification
Authors
abstract
the occurrence of chatter vibrations in boring operation has a great influence in improving workpiece dimensional accuracy, surface quality and production efficiency. in this paper instability analysis of machining process is presented by dynamic model of boring machine. this model, which consists of machine tool’s structure, is provided by finite element method and ansys software. the model is evaluated and corrected with experimental results by modal testing on boring machine in which the natural frequencies and the shape of vibration modes are analyzed. the natural frequencies of this modal testing are extracted through pulse labshop and me’scope modal analysis software.finally, the stability lobes obtained from this model are plotted and compared with experimental results
similar resources
Airflow inside tunnel boring machine: A numerical study and an experimental verification
Knowledge of the airflow distribution inside a Tunnel Boring Machine (TBM) can create a safe working environment for workers and machinery. The airflow quality and the related mass flow rate in the ventilation system should be sufficient to dilute gases and remove dust inside the tunnel. In this work, airflow distribution in the single shield TBM tunnel was studied using computational fluid dyn...
full textEdge-chipping reduction in rotary ultrasonic machining of ceramics: finite element analysis and experimental verification
Rotary ultrasonic machining (RUM) is one of the machining processes for advanced ceramics. Edge chipping (or chamfer), commonly observed in RUM of ceramic materials, not only compromises geometric accuracy but also possibly causes an increase in machining cost. In this paper, a three-dimensional finite element analysis (FEA) model is developed to study the effects of three parameters (cutting d...
full textFinite Element Analysis of Machining Thin-Wall Parts: Error Prediction and Stability Analysis
© 2012 Huang et al., licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Finite Element Analysis of Machining Thin-Wall Parts: Error Prediction and Stability A...
full textExperimental and Finite Element Simulation of Nano-indentation on Metal Matrix Composites: Hardness Prediction
The scientific importance of nanocomposites are being increased due to their improvedproperties. This paper is divided into two parts. First, Al-Al2O3 nanocomposite wasproduced by using ball milling technique followed by cold compaction and sintering.Microstructure and morphology studies were done through SEM, TEM, and EDX anal-ysis on the produced powder. The mechanical properties of the produ...
full textA New Restructured Shaded Pole Induction Motor- 3D Finite Element Analysis and Experimental Verification
Shaded pole induction motors, despite the simplicity and low cost, are difficult to analyze particularly in the equivalent circuit methods, due to the asymmetric structure, saturation, harmonics, inaccurate estimation of leakage inductances and skew. Hence, 3D numerical methods could be very useful in the design and optimization stage. This paper presents the 3D transient finite element analysi...
full textii FINITE ELEMENT SIMULATION OF MACHINING
Dean of the Graduate College iii ACKNOWLEDGEMENTS I wish to express my gratitude to my parents for their confidence in me. I would like to thank them for their consistent encouragement and love. I would like to extend my gratitude to my brother and sister for their inspiration, support and love. My special thanks are due to my roommates in Nandanvan for their motivation and support during my st...
full textMy Resources
Save resource for easier access later
Journal title:
international journal of advanced design and manufacturing technologyجلد ۸، شماره ۱، صفحات ۷۷-۸۳
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023