optimal multi-objective planning of distribution system with distributed generation
Authors
abstract
this paper presents a multi-objective formulation for optimal siting and sizing of distributed generation (dg) resources in distribution systems in order to minimize the cost of power losses and energy not supplied. the implemented technique is based on a genetic algorithm (ga) and weight method that employed to obtain the best compromise between these costs. simulation results on 33-bus distribution test system are presented to demonstrate the effectiveness of the proposed procedure.
similar resources
Optimal Multi-Objective Planning of Distribution System with Distributed Generation
This paper presents a multi-objective formulation for optimal siting and sizing of distributed generation (DG) resources in distribution systems in order to minimize the cost of power losses and energy not supplied. The implemented technique is based on a genetic algorithm (GA) and weight method that employed to obtain the best compromise between these costs. Simulation results on 33-bus distri...
full textOptimal Multi-Objective Planning of Distribution System with Distributed Generation
This paper presents a multi-objective formulation for optimal siting and sizing of distributed generation (DG) resources in distribution systems in order to minimize the cost of power losses and energy not supplied. The implemented technique is based on a genetic algorithm (GA) and weight method that employed to obtain the best compromise between these costs. Simulation results on 33-bus distri...
full textOptimal Distributed Generation Planning in Radial Distribution Networks Considering Protection Coordination Limits
Distributed generation (DG) has been widely used in distribution network to reduce the energy losses, improve voltage profile and system reliability, etc. The location and capacity of DG units can influence on probability of protection mal-operation in distribution networks. In this paper, a novel model for DG planning is proposed to find the optimum DG location and sizing in radial distr...
full textResilience-Based Framework for Distributed Generation Planning in Distribution Networks
Events with low probability and high impact, which annually cause high damages, seriously threaten the health of the distribution networks. Hence, more attention to the issue of enhancing network resilience and continuity of power supply, feels more than ever, all over the world. In modern distribution networks, because of the increasing presence of distributed generation resources, an alternat...
full textA Customer Oriented Approach for Distribution System Reliability Improvement using Optimal Distributed Generation and Switch Placement
The reliability of distribution networks is inherently low due to their radial nature, consequently distribution companies (DisCos) usually seek to improve the system reliability indices with the minimum possible investment cost. This can be known as system-oriented reliability planning (SORP). However, there can exist some customers that are not satisfied by their reliability determined by ado...
full textcoordination of protective schemes in distribution and subtransmission systems including distributed generation
نصب منابع پراکنده در سیستم های توزیع و فوق توزیع علاوه بر مزیت های فراوان، مشکلاتی را هم به همراه دارد. یکی از این مشکلات تأثیر این منابع روی اندازه جریان های اتصال کوتاه است. به طور معمول از حفاظت های مبتنی بر اصل جریان زیاد در سیستم های توزیع و فوق توزیع استفاده می شود. از مهمترین طرح های حفاظتی استفاده شده در فیدرهای توزیع، حفاظت فیوز- ریکلوزر است. همچنین از طرح های حفاظتی جریان زیاد جهتی در...
My Resources
Save resource for easier access later
Journal title:
مهندسی برق و الکترونیک ایرانجلد ۵، شماره ۲، صفحات ۴۱-۴۸
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023