experimental study of the effects of air-injection, injection timing and cooled egr on the combustion, emissions and performance of a nature aspirated direct injection diesel engine
Authors
abstract
in this literature, a combined method has been employed to simultaneously reducesmoke (soot) and oxide of nitrogen (nox) and maintain the performance parameters of dieselengine. this includes creating an air jet by designing an air-cell inside the piston body, advancedinjection timing and using cold exhaust gas recirculation. the tested engine was an mt4.244engine that worked as natural aspiration. the air-cell causes reduction in both soot and noxemissions. furthermore, applying cold egr had a noticeable effect on nox emission reduction.advancing injection timing, the performance parameters of the engine could be improved. thetests were done in 25%, 50%, 75% and 100% load conditions, for the engine speed of 2000 rpm.the results showed that by simultaneous reduction of soot and nox emissions, performanceparameters can be kept in a suitable range. the greatest reductions in nox and soot emissionshave been observed in 100% load. there have been no considerable changes in bsfc (brakespecific fuel consumption and power) while injection timing advances have been applied for5° ca and 5% egr.
similar resources
Experimental Investigation of the Effects of Air Injectionand Injection Timingin a Natural Aspirated DI Diesel Engine
In this experimental study, the effect of creating an air jet inside the combustion chamber by establishing an air-cell inside of the piston body at different injection timings in a DI diesel engine has been studied at 2000 rpm and full load operation. The performed tests include studying the Soot and NOx emissions, combustion and performance parameters. The obtained experimental results show t...
full textInvestigation of injection timing and different fuels on the diesel engine performance and emissions
Start of fuel injection and fuel type are two important factors affecting engine performance and exhaust emissions in internal combustion engines. In the present study, a one-dimensional computational fluid dynamics solution with GT-Power software is used to simulate a six-cylinder diesel engine to study the performance and exhaust emissions with different injection timing and alternative fuels...
full textthe effects of planning on accuracy and complexity of iranian efl students’ written narrative task performance
this study compared the different effects of form-focused guided planning vs. meaning-focused guided planning on iranian pre-intermediate students’ task performance. the study lasted for three weeks and concentrated on eight english structures. forty five pre-intermediate iranian students were randomly assigned to three groups of guided planning focus-on-form group (gpfg), guided planning focus...
15 صفحه اولthe effects of time planning and task complexity on accuracy of narrative task performance
هدف اصلی این تحقیق بررسی تاثیر برنامه ریزی زمانی، هم چنین افزایش میزان پیچیدگی تکالیف در نظر گرفته شده بصورت همزمان، بر دقت و صحت و پیچیدگی عملکرد نوشتاری زبان آموزان می باشد. بدین منظور، 50 نفر از دانش آموزان دختر در رده ی سنی 16 الی 18 سال به عنوان شرکت کنندگان در این زمینه ی تحقیق در نظر گرفته شدند و به دو گروه آزمایشی و کنترل بصورت اتفاقی تقسیم شدند. اعضای گروه آزمایشی هر دو تکلیف ساده و پی...
Effects of Direct Water Injection on DI Diesel Engine Combustion
The effects of in-cylinder water injection on a direct injection (DI) Diesel engine were studied using a computational fluid dynamics (CFD) program based on the Kiva-3v code. The spray model is validated against experimental bomb data with good agreement for vapor penetration as a function of time. It was found that liquid penetration increased approximately 35% with 23% of the fuel volume repl...
full textNumerically Modeling of Diesel Engine and Analysis the Effects of Double Injection Strategies on Performance and Pollutant Emissions
Modern diesel engines should have higher pollutant emissions standards with better performance and by using split injection strategies which could optimize the air – fuel mixture, this purpose could be achieved. After achieving the successful validation between modeling and experimental results for both single and double injection strategies, for the first time and in this paper, double i...
full textMy Resources
Save resource for easier access later
Journal title:
iranian journal of science and technology transactions of mechanical engineeringPublisher: shiraz university
ISSN 2228-6187
volume 39
issue M1 2015
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023