numerical and experimental evaluation of forming limit in hydrodynamic forming process for spherical end samples
Authors
abstract
0
similar resources
An Experimental and Numerical Study of Forming Limit Diagram of Low Carbon Steel Sheets
The forming limit diagram (FLD) is probably the most common representation of sheet metal formability and can be defined as the locus of the principal planar strains where failure is most likely to occur. Low carbon steel sheets have many applications in industries, especially in automotive parts, therefore it is necessary to study the formability of these steel sheets. In this paper, FLDs, wer...
full textNumerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming
The incremental sheet metal forming (ISMF) process is a new and flexible method that is well suited for small batch production or prototyping. This paper studies the use of the finite element method in the incremental forming process of AA1050 sheets to investigate the influence of tool diameter, vertical step size, and friction coefficient on forming force, spring-back, and thickness distribut...
full textan experimental/numerical study on the effect of forming parameters in sheet hydrodynamic deep drawing
there are many parameters that affect the sheet hydroforming process such as fluid pressure, material properties, interfacial friction between blank and tool surfaces, etc. in this paper, a fem-based taguchi method is used to determine the effects of forming parameters on the quality of part formability in the process of hydrodynamic deep drawing assisted by radial pressure. four important form...
full textNumerical Determination of the Forming Limit Diagram for 304 Stainless Steel Based on Phase Change in Deep Drawing Process
Up to now a large number of models have been developed to measure or predict the damage in equipments. Some of these models have been implemented in ABAQUS software. To implement damage parameters in the software, it is necessary to perform complex and expensive practical tests. One of these damage models is Forming Limit Diagram (FLD).The purpose of this research is deriving required parameter...
full textinvestigation of forming limit and weld line movement in the forming of tailor welded blanks using experiment and numerical methods
the forming limit diagram (fld) is a useful method for characterizing the formability of sheet metals. in this paper, different numerical models were used to investigate the fld of tailor welded blank (twb). twbs were co2 laser-welded samples of interstitial-free (if) steel sheets with different thicknesses. the results of the numerical models were compared with the experimental fld as well as ...
full textNumerical and Experimental Investigation of Convex Laser Forming Process
Abstract Laser forming is a flexible sheet metal forming technique using laser-induced thermal deformation to shape sheet metal without hard tooling or external forces. Concave laser forming can be readily achieved, while convex forming may occur through buckling, but the buckling direction heavily depends on the sheet surface and pre-strain condition. A new laser scanning scheme is postulated,...
full textMy Resources
Save resource for easier access later
Journal title:
تحقیقات مکانیک کاربردیجلد ۵، شماره ۱، صفحات ۹-۱۸
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023