determination of stress intensity factor in un-central edge cracks of a semi-infinite plate with a local load
Authors
abstract
0
similar resources
Determination The Stress Intensity Factor in The Un-Central Edge Cracks With The concentrated Load
The stress distribution on the tip of the cracks and the stress intensity factor on them are the main courses in the fracture mechanic. The stress intensity factor of the cracks with the different load exited and the different geometry are listed in the tables of the standard books. In all of them, the cracks are located in the central point of the plates. In the uniform edge loaded case, the c...
full textstress intensity factor detrmination of un-central edge cracks in the semi-infinite plate with the point load
0
full textStress intensity factor at the hole-edge cracks tips in a finite plate
In the current research work, the problem of fracture mechanics in a plate with a central hole under tensile loading is studied. The stress intensity factors are calculated for a finite plate containing two symmetrical hole-edge cracks. The problem is solved by two different methods, namely the finite element method and the FRANC software analysis. At first the finite element method is used and...
full texta swot analysis of the english program of a bilingual school in iran
با توجه به جایگاه زبان انگلیسی به عنوان زبانی بین المللی و با در نظر گرفتن این واقعیت که دولت ها و مسئولان آموزش و پرورش در سراسر جهان در حال حاضر احساس نیاز به ایجاد موقعیتی برای کودکان جهت یاد گیری زبان انگلیسی درسنین پایین در مدارس دو زبانه می کنند، تحقیق حاضر با استفاده از مدل swot (قوت ها، ضعف ها، فرصتها و تهدیدها) سعی در ارزیابی مدرسه ای دو زبانه در ایران را دارد. جهت انجام این تحقیق در م...
15 صفحه اولStress Analysis in Thermosensitive Elliptical Plate with Simply Supported Edge and Impulsive Thermal Load
The paper concerns the thermoelastic problems in a thermosensitive elliptical plate subjected to the activity of a heat source which changes its place on the plate surface with time. The solution of conductivity equation and the corresponding initial and boundary conditions is obtained by employing a new integral transform technique. In addition, the intensities of bending moments, resultant fo...
full textMy Resources
Save resource for easier access later
Journal title:
تحقیقات مکانیک کاربردیجلد ۵، شماره ۲، صفحات ۲۵-۳۸
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023