thermal-economic optimization of shell and tube heat exchanger by using a new multi-objective optimization method

Authors

mohammad sadegh valipour

faculty of mechanical engineering, semnan university, p.o. box 35131-19111, semnan, iran mojtaba biglari

faculty of mechanical engineering, semnan university, p.o. box 35131-19111, semnan, iran ehsanolah assareh

faculty of mechanical engineering, semnan university, p.o. box 35131-19111, semnan, iran.

abstract

many studies are performed by researchers about shell and tube heat exchanger but the multi-objective big bang-big crunch algorithm (mobba) technique has never been used in such studies. this paper presents application of thermal-economic multi-objective optimization of shell and tube heat exchanger using mobba. for optimal design of a shell and tube heat exchanger, it was first thermally modeled using e-ntu method while bell-delaware procedure was applied to estimate its shell side heat transfer coefficient and pressure drop. mobba method was applied to obtain the maximum effectiveness (heat recovery) and the minimum total cost as two objective functions. the results of optimal designs were a set of multiple optimum solutions, called ‘pareto optimal solutions'. in order to show the accuracy of the algorithm, a comparison is made with the non-dominated sorting genetic algorithm (nsga-ii) and mobba which are developed for the same problem.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Thermal-Economic Optimization of Shell and Tube Heat Exchanger by using a new Multi-Objective optimization method

Many studies are performed by researchers about Shell and Tube Heat Exchanger but the Multi-Objective Big Bang-Big Crunch algorithm (MOBBA) technique has never been used in such studies. This paper presents application of Thermal-Economic Multi-Objective Optimization of Shell and Tube Heat Exchanger Using MOBBA. For optimal design of a shell and tube heat exchanger, it was first thermally model...

full text

solution of security constrained unit commitment problem by a new multi-objective optimization method

چکیده-پخش بار بهینه به عنوان یکی از ابزار زیر بنایی برای تحلیل سیستم های قدرت پیچیده ،برای مدت طولانی مورد بررسی قرار گرفته است.پخش بار بهینه توابع هدف یک سیستم قدرت از جمله تابع هزینه سوخت ،آلودگی ،تلفات را بهینه می کند،و هم زمان قیود سیستم قدرت را نیز برآورده می کند.در کلی ترین حالتopf یک مساله بهینه سازی غیر خطی ،غیر محدب،مقیاس بزرگ،و ایستا می باشد که می تواند شامل متغیرهای کنترلی پیوسته و گ...

Economic Optimization of Shell and Tube Heat Exchanger Using Nanofluid

Economic optimization of shell and tube heat exchanger (STHE) is presented in this paper. To increase the rate of heat transfer, copper oxide (CuO) nanoparticle is added into the tube side fluid and their optimum results are compared with the case of without additive nanoparticle. Total annual cost (TAC) is selected as fitness function and nine decision variables related to the heat exchanger p...

full text

Optimization of the total annual cost in a shell and tube heat exchanger by Ant colony optimization technique

This paper examines the total annual cost from economic view heat exchangers based on ant colony optimization algorithm and compared the using optimization algorithm in the design of economic optimization of shell and tube heat exchangers. A shell and tube heat exchanger optimization design approach is expanded based on the total annual cost measured that divided to area of surface and power co...

full text

Optimal Design of Shell-and-Tube Heat Exchanger Based on Particle Swarm Optimization Technique

The paper studies optimization of shell-and-tube heat exchangers using the particle swarm optimization technique. A total cost function is formulated based on initial and annual operating costs of the heat exchangers. Six variables – shell inside diameter, tube diameter, baffle spacing, baffle cut, number of tube passes and tube layouts (triangular or square) – are considered as the design para...

full text

Thermal Analysis of Shell-Side Flow of Shell-and-Tube Heat Exchanger Using Experimental and Theoretical Methods

In this paper the thermal behavior of the shell-side flow of a shell-and-tufe heat exchanger has been studied using theoretical and experimental methods. The experimental method Provided the effect of the major parameters of the shell-side flow on thermal energy exchange. In the numerical method, besides the effect of the major paramerers, the effect of different geometric parameters and Re on ...

full text

My Resources

Save resource for easier access later


Journal title:
journal of heat and mass transfer research

جلد ۳، شماره ۱، صفحات ۶۷-۷۶

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023