an experimental investigation on the performance of a symmetric conical solar collector using sio2/water nanofluid

Authors

a.r. noghrehabadi

department of mechanical engineering, shahid chamran university, ahvaz, i. r.iran e. hajidavaloo

department of mechanical engineering, shahid chamran university, ahvaz, i. r.iran m. moravej

department of mechanical engineering, shahid chamran university, ahvaz, i. r.iran

abstract

one of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. the present study experimentally investigated the effect of sio2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. the conical solar collector with 1 m2 area and normal to the earth was tested in ahvaz, a city in the southwest of iran. the experiments performed under ashrae standard without any surfactants based on the solar radiation, mass flow rate, and temperatures variation. results demonstrated that the thermal efficiency and the temperature performance can be enhanced through sio2/water nanofluid in comparison with pure water. the maximum efficiency and outlet-inlet difference temperature of conical collector using nanofluid was about 62% and 6.8 0c respectively. moreover, the collector behaviors are more efficient with the nanofluid than with pure water in the higher values of the flow rate and sun radiation.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

An experimental investigation on the performance of a symmetric conical solar collector using SiO2/water nanofluid

One of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. The present study experimentally investigated the effect of SiO2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. The conical solar collector with 1 m2 area and normal to the earth was tested in Ahvaz, a city in th...

full text

An experimental investigation of performance of a 3-D solar conical collector at different flow rates

The shape of a solar collector is an important factor in solar-to-thermal energy conversion. Conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. Flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. The present study is an experimentally investigated of the performance of the solar coni...

full text

an experimental investigation of performance of a 3-d solar conical collector at different flow rates

the shape of a solar collector is an important factor in solar-to-thermal energy conversion. conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. the present study is an experimentally investigated of the performance of the solar coni...

full text

Direct Absorption Solar Collector using Carbon Nanotubes Nanofluid: An Experimental Investigation

In this study, the efficiency of direct absorption solar collector (DASC) using carbon nanotube nanofluid in the mixture of water and ethylene glycol as the base fluid was experimentally investigated and compared with the efficiency of the flat plate solar collector (FPSC). The results show that the maximum efficiency of the DASC using the base fluid and absorptive bottom surface is about 4.7% ...

full text

Theoretical and experimental investigation into incident radiation on solar conical collector

The geometry of a collector is one of the important factors that can increase the incident radiation on the collector surface. In the present study, the incident radiation for a stationary collector with cone geometry, i.e. a conical collector, is theoretically and experimentally investigated. This type of collector is always stable and does not need a fixture to install. Moreover, it has a...

full text

Theoretical and experimental investigation into incident radiation on solar conical collector

The geometry of a collector is one of the important factors that can increase the incident radiation on the collector surface. In the present study, the incident radiation for a stationary collector with cone geometry, i.e. a conical collector, is theoretically and experimentally investigated. This type of collector is always stable and does not need a fixture to install. Moreover, it has a...

full text

My Resources

Save resource for easier access later


Journal title:
transport phenomena in nano and micro scales

جلد ۵، شماره ۱، صفحات ۲۳-۲۹

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023