edge detection of potential field anomalies using local phase filters
Authors
abstract
potential fields are due to complex distribution of sources related to susceptibility and mass density variations for magnetic and gravity field respectively. in researching the lateral heterogeneous of different geological bodies, in particular their edge location potential field has some advantages. we mainly refer to linear features such as fault, folding axis, dyke, trend and border of the geological units as well as to circular featurs such as crates and buried voids when mentioning geological bodies. usually, the edge detection and edge enhancement techniques are used to distinguish between geological bodies with different depths and sizes. edge detection methods are based on the position of the maximum or zero-crossing points associated with vertical derivative, horizontal derivative and analytic signal filters. these methods which are famed to derivative-based filters use different orders, but some instability may occur in high-order derivatives since any kind of noise or non-harmonic signal will be correspondingly enhanced with desired signals simultaneously. another difficulty is that in the filtered image, the smaller amplitude features (which may be of considerable importance) may be hard to discern. other edge detection methods are local phase filters (edge enhancement methods) based on the phase variation of the derivative quantities. the advantage of these filters is their flexibility to produce new filters with most applicability just with partial variation. the edge enhancement methods mainly include tilt angle (ta), total horizontal derivative of the tilt angle (thdr), theta map, hyperbolic tilt angle (hta) and normalized horizontal derivative. the tilt angle filter did not serve as a very accurate method of locating deep sources. a much improved result came from using the second vertical derivative of the tilt angle in the space domain. equations (1) to (4) are the local phase filters. (1) (2) (3) (4) where, f is potential field data, t is tilt angle and x,y,z are three cartesian components. in the above equation denote real part of function. in this paper we applied these filters on synthetic magnetic data from a cylinder model as well as on real magnetic data from the abadeh quadrangle. according to the obtained results the dehshir-baft fault in the northeast of the studied and ophiolite outcrops in the southeast are enhanced.
similar resources
edge detection of potential field anomalies using vertical derivative of analytic signal
the analytic signal for magnetic anomalies was initially defined as a “complex field deriving from a complex potential” (nabighian, 1972). this function can be computed easily in the frequency domain, its real part is the horizontal derivative of the field and its imaginary part is the vertical derivative. analytic signal processing and interpretation requires few initial assumptions regarding ...
full textprecise edge detection of gravity anomalies by tilt angle filters
measurements of the tilt angle of potential fields can be a useful aid to their interpretation. there are several varieties of the methods in use, such as tilt angle, and the derivative of tilt angle. tilt angle filters are used for exact edge detection of the rectangular bodies artificially by writing a matlab code. the gravity effects of these models are computed by standard algorithms. the e...
full textEnhancing potential field data using filters based on the local phase
Measures of the local phase of potential fields can be a useful aid to their interpretation. There are several variations in use, such as the tilt angle, tilt derivative and the Theta map. This paper compares the results of these filters, and introduces some new phase-based filters which show improved performance as edge detectors in different ways. The filters are demonstrated on synthetic gra...
full textAn improved method for geological boundary detection of potential field anomalies
Potential field methods such as gravity and magnetic methods are among the most applied geophysical methods in mineral exploration. A high-resolution technique is developed to image geologic boundaries such as contacts and faults. Potential field derivatives are the basis of many interpretation techniques. In boundary detection, the analytic signal quantity is d...
full textEdge detection in gravity field of the Gheshm sedimentary basin
Edge detection and edge enhancement techniques play an essential role in interpreting potential field data. This paper describes the application of various edge detection techniques to gravity data in order to delineate the edges of subsurface structures. The edge detection methods comprise analytic signal, total horizontal derivative (THDR), theta angle, tilt angle, hyperbolic of tilt angle (H...
full textComparison of derivative-based methods by normalized standard deviation approach for edge detection of gravity anomalies
This paper describes the application of the so-called normalized standard deviation (NSTD) method to detect edges of gravity anomalies. Using derivative-based methods enhances the anomaly edges, leading to significant improvement of the interpretation of the geological features. There are many methods for enhancing the edges, most of which are high-pass filters based on the horizontal or vertic...
full textMy Resources
Save resource for easier access later
Journal title:
فیزیک زمین و فضاجلد ۳۶، شماره ۱، صفحات ۰-۰
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023