design and construction of an automatic moldboard profilograph
Authors
abstract
this paper presents design and construction of an automatic moldboard profilograph by substituting an optical sensor and a control system together with its evaluation. the modified profilograph is an electro mechanical apparatus in which a micro switch and a dc motor was replaced with an optical sensor and a control system for revolution of a dc motor. thereby, the considered surface is measured using a non – contact sensor. this apparatus has the capability of drawing the profilograms of a 3-d object as a 2-d drawing in the same contour lines. the profilograms drawn by this apparatus can be useful in moldboard design and its surface modeling. in the end, drawn profilograms before and after modification were compared. then, to verifying apparatus performance, the horizontal and vertical profilograms of a cylindroidal moldboard was drawn.
similar resources
Design and Construction of an Automatic pH Adjustment System by Instant Feedback Method
Evaluations of the acidity or alkalinity of solutions are used in many industries such as food industries, medicine, chemical engineering, petrochemical industries, agriculture, animal husbandry, industrial laboratories, etc. Portable and stationary pH measurements are very common and are an integral part of these studies, due to the importance of pH. In most of these evaluations and studies, a...
full textDesign and implementation of an automatic car turning system
In this paper, a control system is designed for automatic car turning. At first, the necessary information of car turning that were collected from the traffic bylaw, car driving training centers and traffic police are explained. Then, car turning is studied experimentally on several streets with different widths. Afterward, a proper path is designed for the automatic car turning system consider...
full textDesign and Construction of an Electromagetic Supension System for Vehicles
This paper introduces a novel passive suspension system for ground vehicles. This system is based on a flexible Electromagnetic Shock Absorber (EMSA). In the proposed system, efforts are made to a) select a high damping coefficient usable in a car b) determine Physical dimensions and geometry not much different from those of the mechanical shock absorbers and c) seletct EMSA weight and volume l...
full textdesign of an analog fuzzy logic controller chip
fuzzy logic has been developed over the past three decades into a widely applied techinque in classification and control engineering. today fuzzy logic control is one of the most important applications of fuzzy set theory and specially fuzzy logic. there are two general approachs for using of fuzzy control, software and hardware. integrated circuits as a solution for hardware realization are us...
15 صفحه اولDesign and Construction of an Electromagetic Supension System for Vehicles
This paper introduces a novel passive suspension system for ground vehicles. This system is based on a flexible Electromagnetic Shock Absorber (EMSA). In the proposed system, efforts are made to a) select a high damping coefficient usable in a car b) determine Physical dimensions and geometry not much different from those of the mechanical shock absorbers and c) seletct EMSA weight and volume l...
full textMy Resources
Save resource for easier access later
Journal title:
کشاورزی (منتشر نمی شود)جلد ۱۰، شماره ۱، صفحات ۱۶۳-۱۷۴
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023