optimal torque control of pmsg-based stand-alone wind turbine with energy storage system

Authors
abstract

in this paper optimal torque control (otc) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. it is shown that with otc method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. an appropriate control algorithm based on turbine characteristic is designed to extract maximum power from the turbine within a whole range of wind speed changes. besides, energy storage devices (battery bank) are used to ensure continuous supplying loads and power quality. the ac loads are connected to the system via a single-phase inverter as domestic appliances. dynamic stability of the system is also investigated to have a complete surveillance on the system operation in the conditions of hard wind speeds and maximum loads demand. the presented control method, and the other components of the system are modeled in matlab/simulink environment. simulation results show the good performance of the presented wind system in all case studies as well as active power balance.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Optimal Torque Control of PMSG-based Stand-Alone Wind Turbine with Energy Storage System

In this paper optimal torque control (OTC) of stand-alone variable-speed small-scale wind turbine equipped with a permanent magnet synchronous generator and a switch- mode rectifier is presented. It is shown that with OTC method in standalone configuration, power coefficient could be reached to its maximum possible value, i.e. 0.48. An appropriate control algorithm based on turbine characterist...

full text

PMSG Based Stand Alone Wind Power System with Sensorless MPPT

In this paper, analyzing the operation of a Permanent Magnet Synchronous Generator (PMSG) based stand alone wind power system with Sensorless Maximum Power Point Tracking (MPPT) and a system for storing energy during wind speed and load variations. In standalone system, power, balance and power quality require the energy storage system. In conventional systems, MPPT depends on wind turbine para...

full text

Energy Storage for a Stand-alone Wind Energy Conversion System

This paper deals with a wind-based stand-alone generating unit with Permanent Magnet Synchronous Generator (PMSG) and a Lead Acid Battery (LAB) for energy storage, during wind speed variation as well as transient performance under variable load. The main purpose is to supply 230 V/50 Hz domestic appliances through a single-phase inverter. Simulations and experimental results validate the stabil...

full text

Optimal Sizing of a Reliable Hydrogen-based Stand-alone Wind-Fuel Cell System

A hybrid wind/ fuel cell generation system is designed to supply power demand. The aim of this design is to minimize the total cost of the hybrid system over an expected 20 years of operation. The optimization problem is solved aimed at providing a reliable supply for the consumer’s demand. The system consists of fuel cells, some wind units, some electrolyzers, a reformer, an anaerobic reactor ...

full text

Voltage control of stand-alone wind and solar energy system

In this paper wind and solar based stand-alone hybrid energy system is presented for the remote area power system applications. The wind, solar, battery, fuel cell and dump load (i.e., aqua-electrolyzer) are connected to the common dc bus. An ac load is connected to dc bus through a pulse width modulation (PWM) based inverter. Ac voltage at load bus can be maintained at rated value by regulatin...

full text

Predictive Voltage Control of Stand Alone Wind Energy Conversion System

– This paper investigates the application of the model predictive control (MPC) approach to control the voltage and frequency of a stand alone wind generation system. This scheme consists of a wind turbine which drives an induction generator feeding an isolated load. A static reactive power compensator (SVAR) is connected at the induction generator terminals to regulate the load voltage. The ro...

full text

My Resources

Save resource for easier access later


Journal title:
journal of electric power and energy conversion systems

جلد ۱، شماره ۲، صفحات ۵۲-۵۹

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023