an investigation of the corrosive wear of steel balls in grinding of sulphide ores
Authors
abstract
ball mills are common grinding equipment in mineral processing industries. ball wear results from three mechanisms namely impact, abrasion and corrosion. of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. therefore, the aims of this research were to investigate the grinding chemistry influence (slurry ph, solid percentage, water chemistry and gas purging) on corrosive wear of steel balls and to determine the contribution of corrosion mechanism to total wear of steel balls. the results indicated that the mass losses of steel balls could be reduced considerably by controlling the pulp chemistry inside the mill. in addition, the results showed that 73.51% of the corrosion products are generated from the oxidation of steel balls. it was also estimated that the corrosion mechanism accounts for 26.68% of the total wear of steel balls.
similar resources
An investigation of the corrosive wear of steel balls in grinding of sulphide ores
Ball mills are common grinding equipment in mineral processing industries. Ball wear results from three mechanisms namely impact, abrasion and corrosion. Of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. Therefore, the aims of this research were to investigate the grinding chemistry influence (slurry pH, solid percentage, water chemistry an...
full textMODELING AND OPTIMIZING THE CORROSIVE WEAR OF STEEL BALLS IN BALL GRINDING MILL
This paper was aimed to address the modeling and optimization of factors affecting the corrosive wear of low alloy and high carbon chromium steel balls. Response surface methodology, central composite design (CCD) was employed to assess the main and interactive effects of the parameters and also to model and minimize the corrosive wear of the steels. The second-order polynomial regression model...
full textWEAR RATE PREDICTION OF GRINDING MEDIA USING BPNN AND MLR MODELS IN GRINDING OF SULPHIDE ORES
Nowadays steel balls wear is a major problem in mineral processing industries and forms a significant part of the grinding cost. Different factors are effective on balls wear. It is needed to find models which are capable to estimate wear rate from these factors. In this paper a back propagation neural network (BPNN) and multiple linear regression (MLR) method have been used to predict wear rat...
full textan investigation of the types of text reduction in subtitling: a case study of the persian film gilaneh with english subtitles
چکیده ندارد.
15 صفحه اولan investigation about the relationship between insurance lines and economic growth; the case study of iran
مطالعات قبلی بازار بیمه را به صورت کلی در نظر می گرفتند اما در این مطالعه صنعت بیمه به عنوان متغیر مستفل به بیمه های زندگی و غیر زندگی شکسته شده و هم چنین بیمه های زندگی به رشته های مختلف بیمه ای که در بازار بیمه ایران سهم قابل توجهی دارند تقسیم میشود. با استفاده از روشهای اقتصاد سنجی داده های برای دوره های 48-89 از مراکز ملی داده جمع آوری شد سپس با تخمین مدل خود بازگشتی برداری همراه با تعدادی ...
15 صفحه اولstudy of cohesive devices in the textbook of english for the students of apsychology by rastegarpour
this study investigates the cohesive devices used in the textbook of english for the students of psychology. the research questions and hypotheses in the present study are based on what frequency and distribution of grammatical and lexical cohesive devices are. then, to answer the questions all grammatical and lexical cohesive devices in reading comprehension passages from 6 units of 21units th...
My Resources
Save resource for easier access later
Journal title:
int. journal of mining & geo-engineeringPublisher: university of tehran faculty of engineering
ISSN 2345-6930
volume 49
issue 1 2015
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023