flexural toppling failure in rock slopes: from theory to applications
Authors
abstract
toppling failure is one of the most common modes of failure of rock slopes in layered rock strata. flexural toppling is one of the well-known modes of the failure. this type of failure occurs due to bending stress. in this article, a brief yet comprehensive review of toppling failure is presented. firstly, the conditions and general mechanism of the failure are described. then, experimental, theoretical and numerical modeling of the failure is summarized. next, several case histories are analyzed and the results with the existing theoretical models were compared and presented. finally, some practical recommendations as how to use these models are made.
similar resources
Flexural Toppling Failure in Rock Slopes: From Theory to Applications
Toppling failure is one of the most common modes of failure of rock slopes in layered rock strata. Flexural toppling is one of the well-known modes of the failure. This type of failure occurs due to bending stress. In this article, a brief yet comprehensive review of toppling failure is presented. Firstly, the conditions and general mechanism of the failure are described. Then, experimental, th...
full textNumerical Modeling of Rock Slopes with a Potential of Block-Flexural Toppling Failure
One of the most important instabilities of rock slopes is toppling failure. Among the types of toppling failure, block-flexural failures are more common instability which occurs in nature. In this failure, some rock blocks break because of tensile stresses, and some overturn under their weights, and next to all of them topple together. Physical and theoretical modeling of this failure is studie...
full textPhysical and theoretical modeling of rock slopes against block-flexure toppling failure
Block-flexure is the most common mode of toppling failure in natural and excavated rock slopes. In such failure, some rock blocks break due to tensile stresses and some overturn under their own weights and then all of them topple together. In this paper, first, a brief review of previous studies on toppling failures is presented. Then, the physical and mechanical properties of experimental mode...
full textphysical and theoretical modeling of rock slopes against block-flexure toppling failure
block-flexure is the most common mode of toppling failure in natural and excavated rock slopes. in such failure, some rock blocks break due to tensile stresses and some overturn under their own weights and then all of them topple together. in this paper, first, a brief review of previous studies on toppling failures is presented. then, the physical and mechanical properties of experimental mode...
full textRock Slopes from Mechanics to Decision Making
Rock slope instabilities are discussed in the context of decision making for risk assessment and management. Hence, the state of the slope and possible failure mechanism need to be defined first. This is done with geometrical and mechanical models for which recent developments are presented. This leads with appropriate consideration of uncertainties to risk determination and to the description ...
full textStability analysis of block-flexural toppling of rock blocks with round edges
One of the most conventional toppling instabilities is the block-flexural toppling failure that occurs in civil and mining engineering projects. In this kind of failure, some rock columns are broken due to tensile bending stresses, and the others are overturned due to their weights, and finally, all of the blocks topple together. A specific feature of spheroidal weathering is the rounding of th...
full textMy Resources
Save resource for easier access later
Journal title:
int. journal of mining & geo-engineeringPublisher: university of tehran faculty of engineering
ISSN 2345-6930
volume 46
issue 1 2011
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023