preconcentration and determination of palladium water samples by ionic liquid - dispersive liquid liquid microextraction combined with flame atomic absorption spectrometry

Authors

majid ramezani

department of chemistry, faculty of science, islamic azad university, arak branch, arak, iran mohsen heidarzadeh

department of chemistry, faculty of science, islamic azad university, arak branch, arak, iran fatemeh yousefi

department of chemistry, faculty of science, islamic azad university, arak branch, arak, iran

abstract

a simple, rapid and efficient dispersive liquid–liquid microextraction by use of ionic liquid (il-dllme)method, followed by flame atomic absorption spectrometry (faas) was developed for the preconcentrationand determination of palladium in water samples. in this method, an appropriate mixture of acetone and octylmethyl imidazolium hexafluorophosphate was injected rapidly into the aqueous sample containingpalladium-ddtc complex, as a result cloudy mixture was formed. after extraction of palladium complexinto fine droplet, the mixture was centrifuged. as a result, fine organic drop was setteled in the bottom of testtube. after remove of aqueous solution and dilution of organic phase; it was introduced into the flame atomicabsorption by microsampler injector. several parameters influencing the microextraction efficiency, such asthe nature and volume of organic solvent, ph of aqueous solution, amount of complexing agent, stirring rateand extraction time were investigated and optimized. the applicability of technique was evaluated bydetermination of trace amounts of palladium in several water samples. under the optimum conditions, theenhancement factor was 83. the limit of detection, 2.8 μgl−1 and relative standard deviation (rsd) 4.31 %(n=10) were obtained.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Preconcentration and determination of palladium water samples by ionic liquid - dispersive liquid liquid microextraction combined with flame atomic absorption spectrometry

A simple, rapid and efficient dispersive liquid–liquid microextraction by use of ionic liquid (IL-DLLME)method, followed by flame atomic absorption spectrometry (FAAS) was developed for the preconcentrationand determination of palladium in water samples. In this method, an appropriate mixture of acetone and octylmethyl imidazolium hexafluorophosphate was injected rapidly into the aqueous sample...

full text

Ionic Liquid-Based Dispersive Liquid-Liquid Microextraction Combined with Flame Atomic Absorption Spectrometry for Determination of Silver in Water Samples

The widespread use of silver compounds and silvercontaining procedures in industry, medicine, jewellery, cloud seeding and in disinfection of drinking water has resulted in an increasing silver content in environmental samples. Silver impregnated filters are used in water disinfection, while silver concentrations up to 200 μg L are permitted for antimicrobial activities for human health. Silver...

full text

Dispersive Liquid-Liquid Microextraction Based on Solidification of Floating Organic Drop Combined with Flame Atomic Absorption Spectrometry for Preconcentration and Determination of Thallium(III) in Water Samples

Dispersive Liquid-Liquid MicroExtraction technique based on Solidification of a Floating Organic drop (DLLME-SFO) combined with flame atomic absorption spectrometry was developed for determination of thallium in water sample. An appropriate mixture of acetone and 1-undecanol was rapidly injected into an aqueous sample containing TlCl4- which forms an ion pair with bril...

full text

Dispersive Liquid-Liquid Microextraction of Bismuth in Various Samples and Determination by Flame Atomic Absorption Spectrometry

A dispersive liquid-liquid microextraction method for the determination of bismuth in various samples by flame atomic absorption spectrometry is described. In this method, crystal violet was used as counter positive ion for BiCl4 (-) complex ion, chloroform as extraction solvent, and ethanol as disperser solvent. The analytical parameters that may affect the extraction efficiency like acidity o...

full text

Dispersive liquid–liquid microextraction based on solidification of floating organic drop combined with flame atomic absorption spectrometry for determination trace amount of cobalt in water samples

An efficient, rapid, simple, and highly selective dispersive liquid–liquid microextraction basedon solidification of floating organic drop (DLLME-SFOD), combined with flame atomicabsorption spectrometry was developed for preconcentration and determination of trace amountsof cobalt in water samples. In this method, an appropriate mixture of acetone and1-undecanol was injected rapidly into the aq...

full text

dispersive liquid-liquid microextraction based on solidification of floating organic drop combined with flame atomic absorption spectrometry for preconcentration and determination of thallium(iii) in water samples

dispersive liquid-liquid microextraction technique based on solidification of a floating organic drop (dllme-sfo) combined with flame atomic absorption spectrometry was developed for determination of thallium in water sample. an appropriate mixture of acetone and 1-undecanol was rapidly injected into an aqueous sample containing tlcl4- which forms an ion pair with brilliant green reagent and as...

full text

My Resources

Save resource for easier access later


Journal title:
journal of the iranian chemical research

جلد ۵، شماره ۴، صفحات ۲۸۱-۲۸۹

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023