experimental and numerical study of an on-engine turbocharger performance under the inlet pulsating flow
Authors
abstract
the present work is focused on the performance analysis of a 1.7 liter engine with turbocharger. the ultimate target is studying the response of the turbocharger to the inlet pulsating flow. such numerical analysis requires the time variation of pressure and velocity at turbine inlet. in order to achieve such information, one dimensional unsteady viscous compressible flow within a 1.7 liter turbocharged si engine is modeled. it is also necessary to validate the results of simulation by experimental results. a test setup of the turbocharged engine on dynamometer is prepared and various performance parameters are measured at 12 different engine speeds. the comparison between experimental and simulation results shows a very good agreement. in fact, while the mean values of static pressure and temperature at various stations in both experimental and computational approach are fitted fairly on each other, but the amounts of instantaneous parameters are obviously a little bit different. one of the possible sources of errors is the characteristics maps of the turbocharger supplied by the manufacturer which are usually measured at steady operation of turbochargers. the results obtained in the present report will be used in simulating three dimensional unsteady compressible flow in turbocharger turbine which will be reported very soon.
similar resources
Influence of varying timing angle on performance of an SI engine: An experimental and numerical study
Engine performance depends on two main factors of engine speed and ignition time. Ignition timing can affect engine life, fuel economy and engine power. In this paper, to study engine performance of Peugeot 206 TU3A with comparison ratio of 10.5:1 and displacement of 1361CC in MATLAB software, a two-zone burned/unburned model with the fuel burning rate described by aWiebe function was used for ...
full textNumerical Investigation of the Effect of Cooled EGR on Turbocharger HCCI Engine Performance Fueled with Methane
full text
influence of varying timing angle on performance of an si engine: an experimental and numerical study
engine performance depends on two main factors of engine speed and ignition time. ignition timing can affect engine life, fuel economy and engine power. in this paper, to study engine performance of peugeot 206 tu3a with comparison ratio of 10.5:1 and displacement of 1361cc in matlab software, a two-zone burned/unburned model with the fuel burning rate described by awiebe function was used for ...
full textthe effects of planning on accuracy and complexity of iranian efl students’ written narrative task performance
this study compared the different effects of form-focused guided planning vs. meaning-focused guided planning on iranian pre-intermediate students’ task performance. the study lasted for three weeks and concentrated on eight english structures. forty five pre-intermediate iranian students were randomly assigned to three groups of guided planning focus-on-form group (gpfg), guided planning focus...
15 صفحه اولthe effects of time planning and task complexity on accuracy of narrative task performance
هدف اصلی این تحقیق بررسی تاثیر برنامه ریزی زمانی، هم چنین افزایش میزان پیچیدگی تکالیف در نظر گرفته شده بصورت همزمان، بر دقت و صحت و پیچیدگی عملکرد نوشتاری زبان آموزان می باشد. بدین منظور، 50 نفر از دانش آموزان دختر در رده ی سنی 16 الی 18 سال به عنوان شرکت کنندگان در این زمینه ی تحقیق در نظر گرفته شدند و به دو گروه آزمایشی و کنترل بصورت اتفاقی تقسیم شدند. اعضای گروه آزمایشی هر دو تکلیف ساده و پی...
Numerical Investigation of the Impact of Inlet Channel Numbers on the Flow Pattern, Performance, and Erosion of Gas-particle Cyclone
The effect of adding extra inlet channels on the operation of the Stairmand Cyclone has been investigated numerically. The Reynolds stress model (RSM) and Eulerian-Lagrangian method were used to investigate the complex turbulent flow and cyclone performance. The impacts of one-way coupling and two-way coupling models on the cyclone efficiency and the calculation of cut-off size diameter were ex...
full textMy Resources
Save resource for easier access later
Journal title:
مکانیک سیالات و آیرودینامیکجلد ۲، شماره ۴، صفحات ۰-۰
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023