calculation of required heat transfer coefficient for building envelope, in order to achieve optimal thermal performance in floor heating systems
Authors
abstract
0
similar resources
Prediction of Heat Transfer Coefficient for Thermal Regenerators
Correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. The experimental results have been correlated by the least square regression has been obtained.The present correlation has been compared with the heat transfer coefficient correlations in the literature.
full textCalculation of Heat Transfer Coefficient of MWCNT-TiO2 Nanofluid in Plate Heat Exchanger
The objective of the present study is the synthesis of MWCNT-TiO2 hybrid nanostructures by solvothermal synthesis method with TiCl4 as precursor. The heat transfer enhancement due to the use of MWCNT-TiO2 nanofluid was investigated. As-prepared hybrid materials were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that MWCNTs were uniformly dec...
full textNumerical Study of Heat Transfer and Aerosol Deposition in a Room Environment with Under-floor or Baseboard Heating Systems
In this study, heat transfer and aerosol deposition in the under-floor and baseboard heating systems have been investigated, numerically. The aim of this study is a comparison between these heating systems. This comparison obtains the optimal heating system with low suspended particles in the air. Computational fluid dynamic with Eulerian-Lagrangian method has been used to simulate fluid and pa...
full textApplication of ZnO/TiO2 Nanocomposite for the Improvement of Heat Transfer Coefficient in Tube Heat Exchangers
The potential of nanofluids for the improvement of heat transfer coefficient in various heat exchangeequipment has been considered and studied as a major application during recent decades. In this research,heat transfer coefficient of ZnO, TiO2 and ZnO/TiO2 nanofluids in a shell and tube heat exchanger has beenstudied experimentally. ZnO nanoparticle was synthesized through pre...
full textprediction of heat transfer coefficient for thermal regenerators
correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. the experimental results have been correlated by the least square regression has been obtained.the present correlation has been compared with the heat transfer coefficient correlations in the literature.
full textInvestigation of Heat Transfer Coefficient Enhancement for CuO/TiO2 Nanocomposite in a Tube Heat Exchanger
In order to improve the efficiency and rate of heat transfer in heat exchangers, various techniques such as increasing the heat transfer coefficient are proposed. This study is devoted to the investigation of heat transfer coefficient variations due to the addition of CuO, TiO2 and CuO/TiO2 nanoparticles into a shell and tube heat exchanger. CuO/TiO2 nanocomposite was synthesized using mechanic...
full textMy Resources
Save resource for easier access later
Journal title:
مهندسی مکانیک مدرسجلد ۱۶، شماره شماره ۱۳ مقالات کنفرانس، صفحات ۶۹-۷۲
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023