laminar and turbulent aero heating predictions over blunt body in hypersonic flow

Authors

s. a. hosseini

s. noori

abstract

in the present work, an engineering method is developed to predict laminar and turbulent heating-rate solutions for blunt reentry spacecraft at hypersonic conditions. the calculation of aerodynamic heating around blunt bodies requires alternative solution of inviscid flow field around the hypersonic bodies. in this paper, the procedure is of an inverse nature, that is, a shock wave is assumed and calculations proceed along rays normal to the shock. the solution is iterated until the given body is computed. the inverse method is practical for the calculation of flow field between the shock wave and the body surface. body calculation with the body analysis is contrasted and according to the entire differences between those; the shape of shock with the coefficient scales is implemented. the normal momentum equation is replaced with a maslen’s second order pressure equation. this significantlysignificantly decreases machine computation time. the present method predicts laminar and turbulent heating-rates that compare favorably with other researches. since the method is very high-speed, it can be used for preliminary design, or parametric study of aerodynamics vehicles and thermal protection of hypersonic flows.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Laminar and Turbulent Aero Heating Predictions over Blunt Body in Hypersonic Flow

In the present work, an engineering method is developed to predict laminar and turbulent heating-rate solutions for blunt reentry spacecraft at hypersonic conditions. The calculation of aerodynamic heating around blunt bodies requires alternative solution of inviscid flow field around the hypersonic bodies. In this paper, the procedure is of an inverse nature, that is, a shock wave is assumed a...

full text

Numerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow

In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...

full text

Turbulent Flow over Cars

In this paper the flow behaviour over a number of car bodies is studied. For this purpose the unsteady 2-D incompressible Navier-Stokes equations have been applied. After averaging and nondimensionalizing the equations, the system of equations has been transformed from the Cartesian (x-y) coordinates to a body fitted generalized (-) coordinate. As the flow is incompressible, the density in the ...

full text

An Approximate Engineering Method for Aerodynamic Heating Solution around Blunt Body Nose

This paper is devoted to predict laminar and turbulent heating rates around blunt re-entry spacecraft at hypersonic conditions. Heating calculation of a hypersonic body is normally performed during the critical part of its flight trajectory. The procedure is of an inverse method, where a shock wave is assumed, and the body shape that supports this shock, as well as the flowfield between the sho...

full text

Laminar-turbulent transition process in pulsatile flow.

A controlled ex-vivo study of a simple, sinusoidally oscillating flow in a rigid, constant-area, smooth tube, has produced significant insight into the laminar-turbulent transition phenomenon. The development of turbulence was studied by analyzing the dynamic characteristics of the transition process; i.e., the velocity, growth rate, and intermittency which describe the generation and propagati...

full text

My Resources

Save resource for easier access later


Journal title:
علوم و فناوری فضایی

جلد ۷، شماره ۱، صفحات ۰-۰

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023