electrochemical and quantum chemical calculations of two schiff bases as inhibitor for mild steel corrosion in hydrochloric acid solution
Authors
abstract
the corrosion inhibition characteristics of two synthesized schiff bases, namely n, n´-bis(2-hydroxy-6-nitrobenzaldehyde) benzidine and n, n´-bis(salysylaldehyde) benzidine, on the mild steel corrosion in 2.0 m hydrochloric acid have been investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy techniques. these studies were carried out at different concentrations, temperatures and durations. polarization measurements indicate that the two inhibitors act as mixed type inhibitors. the adsorption of inhibitors obeys the langmuir adsorption isotherm and the thermodynamic parameters (ea, kads, δg0ads) were calculated and discussed. quantum chemical calculations were performed to provide further insight into the inhibition efficiencies determined experimentally.
similar resources
Electrochemical Study on Newly Synthesized Chlorocurcumin as an Inhibitor for Mild Steel Corrosion in Hydrochloric Acid
A new curcumin derivative, i.e., (1E,4Z,6E)-5-chloro-1,7-bis(4-hydroxy-3-methoxyphenyl)hepta-1,4,6-trien-3-one (chlorocurcumin), was prepared starting with the natural compound curcumin. The newly synthesized compound was characterized by elemental analysis and spectral studies (IR, ¹H-NMR and 13C-NMR). The corrosion inhibition of mild steel in 1 M HCl by chlorocurcumin has been studied using p...
full textInvestigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution
Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...
full textInvestigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution
Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...
full textElectrochemical and Quantum Chemical Study of Vanillin as a Green Corrosion Inhibitor for AA6061 in NaCl Solution
The effect of vanillin on the corrosion behavior of AA6061 Al alloy in 3.5% NaCl solution wasinvestigated using potentiodynamic polarization and electrochemical noise (EN) techniques. Vanillinoffers interesting possibilities for corrosion inhibition due to its nontoxicity and high solubility inaqueous media. The best inhibition effect at 200 ppm vanillin was a marked characteristic of theinhibi...
full textInvestigation on Ethylenediaminetetra-Acetic Acid as Corrosion Inhibitor for Mild Steel in 1.0M Hydrochloric Acid
full text
Theoretical, thermodynamic and electrochemical analysis of biotin drug as an impending corrosion inhibitor for mild steel in 15% hydrochloric acid
The corrosion mitigation efficiency of biotin drug for mild steel in 15% hydrochloric acid was thoroughly investigated by weight loss and electrochemical methods. The surface morphology was studied by the contact angle, scanning electrochemical microscopy, atomic force microscopy and scanning electron microscopy methods. Quantum chemical calculation and Fukui analysis were done to correlate the...
full textMy Resources
Save resource for easier access later
Journal title:
iranian journal of analytical chemistryPublisher: payame noor university, iran
ISSN 2383-2207
volume 2
issue 1 2015
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023