electrochemical and quantum chemical calculations of two schiff bases as inhibitor for mild steel corrosion in hydrochloric acid solution

Authors

nasrin soltani

abstract

the corrosion inhibition characteristics of two synthesized schiff bases, namely n, n´-bis(2-hydroxy-6-nitrobenzaldehyde) benzidine  and n, n´-bis(salysylaldehyde) benzidine, on the mild steel corrosion in 2.0 m hydrochloric acid have been investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy techniques. these studies were carried out at different concentrations, temperatures and durations. polarization measurements indicate that the two inhibitors act as mixed type inhibitors. the adsorption of inhibitors obeys the langmuir adsorption isotherm and the thermodynamic parameters (ea, kads, δg0ads) were calculated and discussed. quantum chemical calculations were performed to provide further insight into the inhibition efficiencies determined experimentally.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Electrochemical Study on Newly Synthesized Chlorocurcumin as an Inhibitor for Mild Steel Corrosion in Hydrochloric Acid

A new curcumin derivative, i.e., (1E,4Z,6E)-5-chloro-1,7-bis(4-hydroxy-3-methoxyphenyl)hepta-1,4,6-trien-3-one (chlorocurcumin), was prepared starting with the natural compound curcumin. The newly synthesized compound was characterized by elemental analysis and spectral studies (IR, ¹H-NMR and 13C-NMR). The corrosion inhibition of mild steel in 1 M HCl by chlorocurcumin has been studied using p...

full text

Investigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution

Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...

full text

Investigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution

Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...

full text

Electrochemical and Quantum Chemical Study of Vanillin as a Green Corrosion Inhibitor for AA6061 in NaCl Solution

The effect of vanillin on the corrosion behavior of AA6061 Al alloy in 3.5% NaCl solution wasinvestigated using potentiodynamic polarization and electrochemical noise (EN) techniques. Vanillinoffers interesting possibilities for corrosion inhibition due to its nontoxicity and high solubility inaqueous media. The best inhibition effect at 200 ppm vanillin was a marked characteristic of theinhibi...

full text

Theoretical, thermodynamic and electrochemical analysis of biotin drug as an impending corrosion inhibitor for mild steel in 15% hydrochloric acid

The corrosion mitigation efficiency of biotin drug for mild steel in 15% hydrochloric acid was thoroughly investigated by weight loss and electrochemical methods. The surface morphology was studied by the contact angle, scanning electrochemical microscopy, atomic force microscopy and scanning electron microscopy methods. Quantum chemical calculation and Fukui analysis were done to correlate the...

full text

My Resources

Save resource for easier access later


Journal title:
iranian journal of analytical chemistry

Publisher: payame noor university, iran

ISSN 2383-2207

volume 2

issue 1 2015

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023