investigation of furfural as corrosion inhibitor in hydrochloric acid solution
Authors
abstract
effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. lungmuir, frumkin and flory-huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a duration of two hours at temperatures of 50, 60 and 70 degrees centigrade. steel was protected up to 90 percent in concentration of 0.08 mole per liter at temperature of 70 degrees centigrade in 5 percent hydrochloric acid solution. adsorption of furfural on the steel surface obeyed lungmuir isotherm.
similar resources
Investigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution
Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...
full textInvestigation of Furfural as Corrosion Inhibitor in Hydrochloric Acid Solution
Effectiveness of furfural as an organic inhibitor in 5 percent hydrochloric acid which is used in acid pickling of steel was evaluated. Lungmuir, Frumkin and Flory-Huggins isotherms [1, 2] were used to determine the parameters of effective adsorption, free energy and entropy of adsorption. Furfural indicated an inhibition less than 17 percent in concentrations of 0.001 mole per liter for a dura...
full textInvestigation on Ethylenediaminetetra-Acetic Acid as Corrosion Inhibitor for Mild Steel in 1.0M Hydrochloric Acid
full text
Congo Red Dye As A Novel Corrosion Inhibitor for Zinc in Hydrochloric Acid Solution
The inhibitive effect of congo red was examined as corrosion inhibitor for the corrosion of zinc in 1N HCl by conventional weight loss and gasometric methods. Results obtained show that congo red exhibited high inhibition efficiencies. The inhibition efficiency was found to increase with increase in the inhibitor concentration. The adsorption of the inhibitor molecules on the zinc metal surface...
full textelectrochemical and quantum chemical calculations of two schiff bases as inhibitor for mild steel corrosion in hydrochloric acid solution
the corrosion inhibition characteristics of two synthesized schiff bases, namely n, n´-bis(2-hydroxy-6-nitrobenzaldehyde) benzidine and n, n´-bis(salysylaldehyde) benzidine, on the mild steel corrosion in 2.0 m hydrochloric acid have been investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy techniques. these studies were carried out at different ...
full textAcrylonitrile derivatives as corrosion inhibitors for Cu10Ni alloy in 0.5 M hydrochloric acid solution
Corrosion inhibition of Cu10Ni alloy in 0.5 M HCl solution using acrylonitrile derivatives namely: (E)-2(1H-indole-3-carbonyl)-3-(2-oxo-2-phenylethylthio)-3-(phenylamino)acrylonitrile(a),(E)-2-(1H-indole-3carbonyl)-3-mercapto-3-(phenylamino)acrylonitrile(b)and(Z)-2-(1H-indole-3-carbonyl)-3 phenylacrylonitrile (c) was investigated by potentiodynamic polarization, electrochemical impedance spectr...
full textMy Resources
Save resource for easier access later
Journal title:
روش های عددی در مهندسی (استقلال)جلد ۱۶، شماره ۲، صفحات ۷۱-۸۰
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023