comparison of carburizing and boronizing processes on mechanical and wear properties of pm parts

Authors

فخرالدین اشرفی زاده و محمدرضا طرقی نژاد

f. ashrafizadeh

m. r. toroghinezhad

abstract

in this study carburizing and boronizing processes were applied to powder metallurgy steel specimens and the mechanical and tribological properties of the substrate and coatings were evaluated under various process conditions. the specimens, made from industrial test pieces, were carburized in a powder pack for a duration of 2-5 hrs at 850-950 ˚c. similar specimens were pack boronized for 4 hrs at 950 ˚c. the effect of austenitization-quench treatment was also investigated on some specimens. the wear tests were carried out by means of a pin-on-disc tribotester against ball bearing steel. the results indicate that by appropriate selection of process parameters it is possible to obtain high wear resistance together with moderate toughness. boride layers with hardness values of 1700hv are properly formed on pm samples. the wear resistance, therefore, is significantly increased with practically no reduction in impact resistance. it is concluded that boronizing treatment can be more suitable for some pm parts under tribological conditions.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Comparison of Carburizing and Boronizing Processes on Mechanical and Wear Properties of PM Parts

In this study carburizing and boronizing processes were applied to powder metallurgy steel specimens and the mechanical and tribological properties of the substrate and coatings were evaluated under various process conditions. The specimens, made from industrial test pieces, were carburized in a powder pack for a duration of 2-5 hrs at 850-950 ˚C. Similar specimens were pack boronized for 4 hr...

full text

Comparison of Carburizing and Boronizing Processes on Mechanical and Wear Properties of PM Parts

In this study carburizing and boronizing processes were applied to powder metallurgy steel specimens and the mechanical and tribological properties of the substrate and coatings were evaluated under various process conditions.&#10The specimens, made from industrial test pieces, were carburized in a powder pack for a duration of 2-5 hrs at 850-950 ˚C. Similar specimens were pack boronized for 4 ...

full text

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

on the comparison of keyword and semantic-context methods of learning new vocabulary meaning

the rationale behind the present study is that particular learning strategies produce more effective results when applied together. the present study tried to investigate the efficiency of the semantic-context strategy alone with a technique called, keyword method. to clarify the point, the current study seeked to find answer to the following question: are the keyword and semantic-context metho...

15 صفحه اول

some properties of fuzzy hilbert spaces and norm of operators

in this thesis, at first we investigate the bounded inverse theorem on fuzzy normed linear spaces and study the set of all compact operators on these spaces. then we introduce the notions of fuzzy boundedness and investigate a new norm operators and the relationship between continuity and boundedness. and, we show that the space of all fuzzy bounded operators is complete. finally, we define...

15 صفحه اول

My Resources

Save resource for easier access later


Journal title:
روش های عددی در مهندسی (استقلال)

جلد ۱۷، شماره ۱، صفحات ۱۷۷-۱۸۶

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023