zinc-nickel binary alloys electrodeposition of steel using pulse current

Authors

علیرضا نصر اصفهانی و محمود حیدرزاده سهی

a. nasr-esfahany and m.heydarzadeh sohi

abstract

zinc-nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. in this work the effect of pulse parameters on the zn-ni alloy electrodeposits was investigated. the hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. the surface topography of the deposits was also observed in sem and results are reported. it has been shown that the thickness of the pulse electrodeposits was almost even. the hardness in the pulse electrodeposits increased by increasing the on-time period and by decreasing the current density. it was also noticed that increasing the on-time period increases the nickel content of the deposit. pulse electrodposits had fine structure and the structure become finer by reducung the on-time period and pulse frequency. the corrosion dehaviors of the deposits were then investigated. the results showed that the corrosion resistance of the dc electrodeposits improves in their nickel content increases. pulse electodeposits show the same behavior, but deposits with about 13% nickel show maximum corrosion resistance.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current

Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in S...

full text

Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current

Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in S...

full text

The electrodeposition of zinc alloys from ionic liquid electrolytes

Electrodeposited zinc alloys have long been recognised as effective barrier and sacrificial coatings for ferrous substrates. The effect of alloying zinc with, in the main, more noble metals, has produced finishes of higher corrosion resistance than simply electrodeposited zinc. In this manner zinc alloys such as zinc-nickel, zinc-cobalt and zinc-iron are routinely electrodeposited on an industr...

full text

Investigations of Magnetic Properties Through Electrodeposition Current and Controlled Cu Content in Pulse Electrodeposited CoFeCu Nanowires

CoFeCu nanowires were deposited by pulsed electrodeposition technique into the porous alumina templates by a two-step mild anodization technique, using the single-bath method. The electrodeposition was performed in a constant electrolyte while Cu constant was controlled by electrodeposition current. The electrodeposition current was 3.5, 4.25, 5 and 6 mA. The effect of electrodeposition current...

full text

Ternary Ni-Fe-Co Alloys Nanowire Electrodeposition

Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy. We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relation ...

full text

Electrodeposition of Metals and Alloys

Tremendous potential exists for the growth of metal finishing industry in this century through the development of processes that are either environmentally friendly or are applicable at the nano scale. In the CEE the theoretical and experimental studies are performed to achieve such coatings. Nanostructured alloys and innovative composite materials were developed through adaptation of existing ...

full text

My Resources

Save resource for easier access later


Journal title:
روش های عددی در مهندسی (استقلال)

جلد ۲۳، شماره ۲، صفحات ۱۹۷-۲۰۵

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023