mechanical properties of dissimilar welds between aisi 4130 and gost09ch16n4b

Authors

a. h. madadian

department of materials engineering, science and research branch, islamic azad university, tehran h. najafi

department of materials engineering, science and research branch, islamic azad university, tehran m. a. safarkhanian

faculty of engineering, majlesi branch, islamic azad university, new isfahan city, isfahan, iran s. nategh

department of materials engineering, science and research branch, islamic azad university, tehran. iran

abstract

mechanical properties of dissimilar weld joints between gost09ch16n4b (a martensitic stainless steel) and aisi 4130 thin sheets made by gas tungsten arc welding (gtaw) were studied using er410nimo and er100s-g filler metals in post weld heat treated conditions. heat treatment cycles consisted of austenitization at 900, 950 and 1000 °c for 1 h and this was followed by oil cooling and tempering at 400 and 500 °c for 1 h. tensile tests and microhardness measurements were carried out to evaluate the mechanical properties. the base metals, heat affected zones (hazs) and fusion zones were observed by optical microscope and scanning electron microscope (sem) equipped with energy dispersive spectroscope (eds). based on the results, it was found that the joints strength and microhardness profiles were almost independent of austenitization temperature, but they were affected by the tempering temperature. increasing the tempering temperature led to the reduction in the hardness of aisi 4130 and the joints strength. tensile samples were fractured in the base metals. furthermore, the fracture was shifted from gost09ch16n4b to aisi 4130 with increasing the tempering temperature. crack initiation from delta-ferrite led to the fracture in gost09ch16n4b. strength and elongation obtained from different pwhts indicated that tempering at 400 °c resulted in acceptable tensile properties for the weldments made with both filler metals.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Mechanical Properties of Dissimilar Welds between AISI 4130 and GOST09ch16N4B

Mechanical properties of dissimilar weld joints between GOST09ch16N4B (a martensitic stainless steel) and AISI 4130 thin sheets made by gas tungsten arc welding (GTAW) were studied using ER410NiMo and ER100S-G filler metals in post weld heat treated conditions. Heat treatment cycles consisted of austenitization at 900, 950 and 1000 °C for 1 h and this was followed by oil cooling and tempering a...

full text

Investigation of microstructures and mechanical properties of dissimilar welds between Incoloy 825 and 316 stainless steel

In this study, microstructural features and mechanical properties of Incoloy 825-316L stainless steel dissimilar joints have been investigated. For this purpose, pulsed gas tungsten arc welding method was employed and 316L, Inconel 82 and Inconel 625 alloys were used as filler metal. First, specimens were cut. Pulsed gas tungsten arc welding was performed using peak and base currents of 220 A a...

full text

Investigation of microstructures and mechanical properties of dissimilar welds between Incoloy 825 and 316 stainless steel

In this study, microstructural features and mechanical properties of Incoloy 825-316L stainless steel dissimilar joints have been investigated. For this purpose, pulsed gas tungsten arc welding method was employed and 316L, Inconel 82 and Inconel 625 alloys were used as filler metal. First, specimens were cut. Pulsed gas tungsten arc welding was performed using peak and base currents of 220 A a...

full text

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

Mechanical and Metallurgical Aspects of Dissimilar Metal Welds a Review

A literature review of studies and researches has been attempted in the field of dissimilar metal welding. Dissimilar metal welds have numerous industrial applications in area of thermal power generation, chemical, petrochemical, automobile, aerospace industries and nuclear plants etc. The purpose of this paper is to review: (a) Dissimilar metal welds, their Metallurgical and Mechanical aspects...

full text

Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657

The aim of this paper is to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 for use in oil-refining industries. The welds were produced using four types of filler materials; nickel-based alloys designated as Inconel 82, A, 617, and 310 SS. The interfaces and heat-affected zones were characterized by optical and scanning electron microscopy. Interfaces on the two sides...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of iron and steel society of iran

جلد ۱۳، شماره ۱، صفحات ۱-۷

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023