effect of cyclic loading on punching shear strength of slabs strengthened with carbon fiber polymer sheets
Authors
abstract
in this paper, the effect of cyclic loading on punching strength of flat slabs strengthened with carbon fiber reinforced polymer (cfrp) sheets is studied. experimental results of ten slab specimens under monotonic and cyclic loading are analyzed. eight specimens were strengthened with cfrp sheets on the tensile face of the slabs and the two other specimens were kept un-strengthened as control specimens. the width of cfrp sheets varied in different specimens. after the tests, the punching shear strength of specimens under cyclic loading was compared with those with monotonic loading. the comparison of results shows that cyclic loading decreases the effect of cfrp sheets on punching shear strengthening. this decrease was more for the specimens with a larger value of reinforcing steel ratio. therefore, it can be concluded that for specimens with large reinforcing steel ratios, cyclic loading may completely eliminate the effect of cfrp sheets on shear strengthening of slabs.
similar resources
Improving the Punching Shear Strength of RC Slabs by FRP and Steel Sheets
This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...
full textBehavior of Coupling Beams Strengthened with Carbon Fiber Reinforced Polymer Sheets
In this research, using the results of 6 tests, the effect of Carbon Fiber Reinforced Polymer (CFRP) sheets on the behavior of reinforced concrete coupling beams of shear walls is studied. First, in the experimental part of the study, four coupling beams with different reinforcements were manufactured and tested. Then, after the failure of the specimens, two of them were rehabilitated and stren...
full textPunching shear strength of steel fibre reinforced concrete slabs
The ultimate strength of reinforced concrete slabs is frequently governed by the punching shear capacity, which may be increased with addition of traditional fitments such as reinforcing steel, headed studs or shear heads. In addition to these traditional methods of strengthening against punching, steel fibre reinforcement has proved to be an effective and viable alternative. The addition of fi...
full textPunching strength of actual two-way slabs
Many building codes rely on empirical formulations with respect to the punching shear design provisions. Such empirical equations are typically calibrated on the basis of laboratory tests performed on simplified geometries (usually isolated specimens) with usually statically-determined loading conditions. On the contrary, actual structures, particularly two-way slabs, are continuous and highly ...
full textStrength of Footing with Punching Shear Preventers
The punching shear failure often governs the strength of the footing-to-column connection. The punching shear failure is an undesirable failure mode, since it results in a brittle failure of the footing. In this study, a new method to increase the strength and ductility of the footing was proposed by inserting the punching shear preventers (PSPs) into the footing. The validation and effectivene...
full textthe effect of taftan pozzolan on the compressive strength of concrete in the environmental conditions of oman sea (chabahar port)
cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...
My Resources
Save resource for easier access later
Journal title:
international journal of civil engineeringجلد ۶، شماره ۳، صفحات ۲۰۸-۲۱۵
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023