progressive collapse evaluation of rc symmetric and asymmetric mid-rise and tall buildings under earthquake loads

Authors

s. karimiyan int’l institute of earthquake eng. and seismology (iiees), tehran, iran no. 21, arghavan st., north dibajee, farmanieh

a. moghadam int’l institute of earthquake eng. and seismology (iiees), tehran, iran no. 21, arghavan st., north dibajee, farmanieh

a. . husseinzadeh kashan department of industrial engineering, faculty of engineering, tarbiat modares university, tehran, iran

m. karimiyan 4applied science and technology university, tehran, iran

abstract

plan irregularity causes local damages being concentrated in the irregular buildings. progressive collapse is also the collapse of a large portion or whole building due to the local damages in the structure. the effect of irregularity on the progressive collapse potential of the buildings is investigated in this study. this is carried out by progressive collapse evaluation of the asymmetric mid rise and tall buildings in comparison with the symmetric ones via the nonlinear time history analyses in the 6, 9 and 12 story reinforced concrete buildings. the effect of increasing the mass eccentricity levels is investigated on the progressive collapse mechanism of the buildings with respect to the story drift behavior and the number of beam and column collapsed hinges criteria. according to the results, increasing the mass eccentricity levels causes earlier instability with lower number of the collapsed hinges which is necessary to fail the asymmetric buildings and at the same time mitigates the potential of progressive collapse. moreover, the decreasing trend of the story drifts of the flexible edges is lower than those of the stiff edges and the mass centers and the amount of decrement in the story drifts of the stiff edges is approximately similar to those of the mass centers.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Probability Assessment and Risk Management of Progressive Collapse in Strategic Buildings Facing Blast Loads

Nowadays, as a result of increased terrorist and bomb attacks throughout the globe in the vicinity of strategic buildings, designing these structures against impact loads, particularly the blast-related ones, has been taken into more consideration. The current procedure for designing the structure against an explosion is a design against the local failure of the current elements in the first st...

full text

Analysis of Tall Buildings with Bundled Tube System Subjected to Wind and Earthquake loads

At present, the tubular structural systems are mainly used in tall buildings to withstand earthquake loads. Although it is possible to analyse the structure by finite element methods using standard three dimensional programs, the system is generally time-consuming and expensive in the primary design work. In this paper, for the analysis of Framed-Tube systems, a simple method was studied and de...

full text

On Symmetric and Asymmetric Buckling Modes of Functionally Graded Annular Plates under Mechanical and Thermal Loads

In the present article, buckling analysis of functionally graded annular thin and moderately thick plates under mechanical and thermal loads is investigated. The equilibrium and stability equations of the plate are obtained based on both classical and first order shear deformation plate theories. By using an analytical method, the coupled stability equations are converted to independent equatio...

full text

Analysis of Tall Buildings with Bundled Tube System Subjected to Wind and Earthquake loads

At present, the tubular structural systems are mainly used in tall buildings to withstand earthquake loads. Although it is possible to analyse the structure by finite element methods using standard three dimensional programs, the system is generally time-consuming and expensive in the primary design work. In this paper, for the analysis of Framed-Tube systems, a simple method was studied and de...

full text

DESIGN OPTIMIZATION OF RC FRAMES UNDER EARTHQUAKE LOADS

This paper deals with the optimization of reinforced concrete (RC) structures under earthquake loads by introducing a simple methodology. One of the most important problems in the design of RC structures is the existing of various design scenarios that all of them satisfy design constraints. Despite of the steel structures, a large number of design candidates due to a large number of design var...

full text

Mechanism of Collapse of Tall Steel Moment Frame Buildings Under Earthquake Excitation

We expound on the nature of collapse of one class of tall buildings (steel moment frame buildings) under earthquake excitation. Using a parametric analysis of a couple of index buildings subjected to idealized ground motion histories, we establish the ground motion features that cause collapse in these structures. Systematically mapping damage localization patterns, we track the evolution of th...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of civil engineering

جلد ۱۳، شماره ۱، صفحات ۳۰-۴۴

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023