large lithium polymer battery modeling for the simulation of hybrid electric vehicles using the equivalent circuit method
Authors
abstract
in the present study, a model of a large lithium polymer (li-po) battery for use in the simulation of hybrid electric vehicles (hevs) is developed. to attain this goal, an equivalent circuit (ec) consisting of a series resistor and two rc parallel networks is considered. the accuracy and the response time of the model for use in an hev simulator are studied. the battery parameters identification and model validation tests are performed in low current with a good accuracy. similar test process is implemented in high current for another cell and the simulation is verified with experimental results. the validation tests confirm the accuracy of the model for use in hev simulator. finally, the battery model is used to model a vehicle, fuel and environment research institute (vferi) hybrid electric city bus using advisor software and its compatibility with other components of the vehicle simulator are demonstrated in a drive cycle test.
similar resources
Large Lithium Polymer Battery Modeling for the Simulation of Hybrid Electric Vehicles Using the Equivalent Circuit Method
In the present study, a model of a large Lithium Polymer (Li-Po) battery for use in the simulation of Hybrid Electric Vehicles (HEVs) is developed. To attain this goal, an Equivalent Circuit (EC) consisting of a series resistor and two RC parallel networks is considered. The accuracy and the response time of the model for use in an HEV simulator are studied. The battery parameters identifica...
full textbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Modeling and Simulation of Hybrid Electric Vehicles
With increasing oil price and mounting environment concerns, cleaner and sustainable energy solutions have been demanded. At present transportation constitutes a large portion of the energy consumed and pollution created. In this work, two hybrid vehicle powertrain technologies were studied, a fuel cell battery hybrid and two internal combustion engine battery/ultracapacitor hybrids. Powertrain...
full textthe use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach
abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...
15 صفحه اولThermal behavior of a commercial prismatic Lithium-ion battery cell applied in electric vehicles
This paper mainly discusses the thermal behavior and performance of Lithium-ion batteries utilized in hybrid electric vehicles (HEVs), battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs) based on numerical simulations. In this work, the battery’s thermal behavior is investigated at different C-rates and also contour plots of phase potential for both tabs and volume-mo...
full textMy Resources
Save resource for easier access later
Journal title:
international journal of automotive engineeringجلد ۳، شماره ۴، صفحات ۵۶۴-۵۷۶
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023