thermo-mechanical analysis of fatigue cracks of diesel engines cylinder heads using a two-layer two-layer viscoplasticity model with considering viscosity effects

Authors

h. ashuri

abstract

loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. one of the most important durability problems in diesel engines is due to the cracks valves bridge area. the purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoplasticity model. in this article, mechanical properties of a alloy, obtained by tensile tests at and c. tensile tests were simulated by abaqus software and very good agreement was shown between experimental and simulation results of tensile tests. the results of the thermo-mechanical analysis indicated that the maximum temperature and stress occurred in the valves bridge. the results of the finite element analysis showed that when the engine is running the stress in the region is compressive caused by the thermal loading and combustion pressure. when the engine shut off the compressive stress turned into the tensile stress because of assembly loads. the valves bridge was under the cyclic tensile and compressive stress and then is under low cycle fatigue. after several cycles the fatigue cracks will appear in this region. the results of the thermo-mechanical analysis of cylinder heads correspond with the simulation results, carried out by researchers. viscous strain was significant and its amount is not negligible.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Thermo-mechanical analysis of fatigue cracks of diesel engines cylinder heads using a two-layer two-layer viscoplasticity model with considering viscosity effects

Loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. One of the most important durability problems in diesel engines is due to the cracks valves bridge area. The purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoplasticity model. In this article, mechanical p...

full text

Analysis of Fatigue Cracks of Diesel Engines Cylinder Heads using a Two-Layer Viscoplasticity Model and Considering Viscousity Effects

Loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. One of the most important durability problems in diesel engines is due to the cracks valves bridge area. The purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoplasticity model. The results of the thermo-mechani...

full text

Thermo-mechanical analysis of diesel engines cylinder heads using a two-layer viscoelasticity model with considering viscosity effects

Loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. One of the most important durability problems in diesel engines is due to the cracks valves bridge area. The purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoelasticity model. The results of the thermo-mechani...

full text

Thermo-mechanical analysis of magnesium alloy cylinder heads using a two-layer viscoplasticity model

Loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. The aim of this study is to compare the distribution of temperature and stress in the aluminum and magnesium cylinder heads under thermo-mechanical loads. The three-dimensional model of the cylinder heads was simulated in abaqus software and a two-layer viscoplasticity mod...

full text

Finite element analysis of thermo-mechanical stresses in diesel engines cylinder heads using a two-layer viscoelasticity model

Loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. One of the most important durability problems in diesel engines is due to the cracks valves bridge area. The purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoplasticity model. In this article, mechanical prope...

full text

Thermal barrier coating effect on stress and temperature distribution of diesel engines cylinder heads using a two-layer viscoelasticity model with considering viscosity effects

This paper presents finite element analysis (FEA) of a coated and uncoated cylinder heads of a diesel engine to examine the distribution of temperature and stress. A thermal barrier coating system was applied on the combustion chamber of the cylinder heads, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of automotive engineering

جلد ۶، شماره ۲، صفحات ۲۱۶۳-۲۱۷۵

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023