mathematical modeling of column-base connections under monotonic loading
Authors
abstract
some considerable damage to steel structures during the hyogo-ken nanbu earthquake occurred. among them, many exposed-type column bases failed in several consistent patterns, such as brittle base plate fracture, excessive bolt elongation, unexpected early bolt failure, and inferior construction work, etc. the lessons from these phenomena led to the need for improved understanding of column base behavior. joint behavior must be modeled when analyzing semi-rigid frames, which is associated with a mathematical model of the moment–rotation curve. the most accurate model uses continuous nonlinear functions. this article presents three areas of steel joint research: (1) analysis methods of semi-rigid joints; (2) prediction methods for the mechanical behavior of joints; (3) mathematical representations of the moment–rotation curve. in the current study, a new exponential model to depict the moment–rotation relationship of column base connection is proposed. the proposed nonlinear model represents an approach to the prediction of m–θ curves, taking into account the possible failure modes and the deformation characteristics of the connection elements. the new model has three physical parameters, along with two curve-fitted factors. these physical parameters are generated from dimensional details of the connection, as well as the material properties. the m–θ curves obtained by the model are compared with published connection tests and 3d fem research. the proposed mathematical model adequately comes close to characterizing m–θ behavior through the full range of loading/rotations. as a result, modeling of column base connections using the proposed mathematical model can give crucial beforehand information, and overcome the disadvantages of time consuming workmanship and cost of experimental studies.
similar resources
Mathematical Modeling of Column-Base Connections under Monotonic Loading
Some considerable damage to steel structures during the Hyogo-ken Nanbu Earthquake occurred. Among them, many exposed-type column bases failed in several consistent patterns, such as brittle base plate fracture, excessive bolt elongation, unexpected early bolt failure, and inferior construction work, etc. The lessons from these phenomena led to the need for improved understanding of column base...
full textAnalytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE)
In this study, the behavior characteristics of I beam-to-concrete filled tube (CFT) column connection is studied through experiment and finite element models under the monotonic loading. To validate the finite element modeling, at first, an experimental model is made and experimented. After validation of the finite element modeling, different models were created in the software. The studied par...
full textperformance of exterior precast concrete beam-column dowel connections under cyclic loading
the present study focuses on the performance of precast concrete beam-column dowel connections subjected to cyclic loading by conducting experiments. in this study, one-third scale model of two types of precast and a monolithic beam-column connection were cast and tested under reverse cyclic loading. the precast connections considered for this study is a beam-column connection where beam is con...
full textInfluence of Sudden Column Loss on Dynamic Response of Steel Moment Frames under Blast Loading
Modeling buildings response to blast and subsequent progressive collapse interested more and more researchers during the past two decades. Due to the threat from extreme loading, efforts have been made to develop methods of structural analysis and design. In this paper, progressive collapse capacity of steel moment frames was first investigated using alternate load path method, then a nonlinear...
full textModeling of human calvarium under static loading
There are many papers on head modeling in literature [1]. Generally, the topic of most of them is designing and modeling devices for head (especially brain) protection, e.g. helmets. On the other side, most papers are about modeling of whole part of top body (a torso and a head). The main aim of these researches is simulation of the backbone behavior under external load applied to the head. The...
full textMy Resources
Save resource for easier access later
Journal title:
civil engineering infrastructures journalجلد ۴۷، شماره ۲، صفحات ۲۵۵-۲۷۲
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023