removal of dye (blue 56) from aqueous solution via adsorption onto pistachio shell: kinetic and isotherm study of removal process

Authors

a. ravanpaykar department of chemistry, gachsaran branch, islamic azad university, p.o. 75818-63875 gachsaran, iran.

a. asfaram department of chemistry, gachsaran branch, islamic azad university, p.o. 75818-63875 gachsaran, iran.

m. r. fathi emadabadi department of chemistry, gachsaran branch, islamic azad university, p.o. 75818-63875 gachsaran, iran.

abstract

in the present investigation, shells of pistachio are used as adsorbents and they have been successfully used for the removal of blue 56, from water samples. the effect of various parameters such as: ph, amounts of adsorbents, size of adsorbent particles and contact time on removal processing were investigated. in this study freundlich absorption isotherms and langmuir were investigated . the experimental data were correlated reasonably well by the freundlich adsorption isotherm and isotherm parameters were calculated. in order to investigate the efficiency of blue 56 adsorption on the pistachio shell, pseudo-first-order, pseudo-second-order, elovich and intra-particle diffusion kinetic models were studied . the model that had good correlation to attract freundlich was chosen as the model . its kinetics follows the pseudo second order reaction .

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Synthesis and Performance Evaluation of Chitosan Prepared from Persian Gulf Shrimp Shell in Removal of Reactive Blue 29 Dye from Aqueous Solution (Isotherm, Thermodynamic and Kinetic Study)

This study was aimed to investigate the amount of reactive blue 29 (RB29) dye removal from aqueous solution by Chitosan extracted from Persian Gulf shrimp shell. The effect of parameters such as pH, the concentration of reactive blue 29 dye, contact time, and adsorbent dosage in dye removal was studied. Isotherm, Thermodynamics, and kinetics of adsorption process were also investigated. The...

full text

Kinetic analysis for the removal of a reactive dye from aqueous solution onto hydrotalcite by adsorption.

The removal of a reactive color, Cibacron Yellow LS-R, from aqueous solutions by adsorption onto hydrotalcite particles is investigated using batch rate experiments. Measurements are performed at various initial color concentrations, solid loads, pH values and ionic backgrounds (dissolved NaCl). The speed of agitation and the temperature inside the batch adsorber are also varied within a practi...

full text

Montmorillonite as Efficient Nanoclay for Removal of Aniline Blue Dye: Optimization, Isotherm and Kinetic Study

In this study, montmorillonite clay was used as the adsorbent for the removal of Aniline Blue dye, from aqueous solution by the batch adsorption technique under different conditions. The maximum removal of aniline blue dye for initial dye concentration 20 mg/L was more than 95% at optimum conditions (pH=4.5, contact time=30 min, and adsorbent dosage=2 g/L). The data of this study were fitted wi...

full text

Physical Chemistry Studies of Acid Dye Removal from Aqueous Media by Mesoporous Nano Composite: Adsorption Isotherm, Kinetic and Thermodynamic Studies

In this research, SBA-15/Polypyrrole (SBA-15/PPy) mesoporous nanocomposite was synthesized, characterized and applied for Acid Blue 62 (AB62) adsorption as a textile dye from aqueous solution. In order to evaluate the structural properties of synthesized adsorbent, FT-IR, FESEM and TEM images, XRD, and BET techniques were applied. Some parameters such as pH, dosage, and time which affect the ba...

full text

Removal of methylene blue dye aqueous solution using photocatalysis

The nano sized TiO2 and ZnO are the most active photocatalysts.  Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...

full text

Removal of methylene blue dye aqueous solution using photocatalysis

The nano sized TiO2 and ZnO are the most active photocatalysts.  Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...

full text

My Resources

Save resource for easier access later


Journal title:
journal of chemical health risks

جلد ۲، شماره ۱، صفحات ۰-۰

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023