effect of conjugate heat transfer in designing thermoelectric beverage cooler
Authors
abstract
peltier technology opens new opportunities for specialapplications. in the current project, this technology was appliedto design and fabricate a portable thermoelectric beveragecooler and thermoelectric cup. the simulation and results of theexperiment showed that the common beverage cooler is not asuitable design for ignoring the effect of natural convection incooling. in our thermoelectric cup, the drawbacks of previousdesign were eliminated. the advantages of the present designover the former design are the heat sink's temperature reductionfrom 60°c to about 31°c, and the cooling process enhancement,such that the water was cooled down to about 7°c.
similar resources
Effect of conjugate heat transfer in designing thermoelectric beverage cooler
Peltier technology opens new opportunities for special applications. In the current project, this technology was applied to design and fabricate a portable thermoelectric beverage cooler and thermoelectric cup. The simulation and results of the experiment showed that the common beverage cooler is not a suitable design for ignoring the effect of natural convection in cooling. In our thermoel...
full textEffect of conjugate heat transfer in designing thermoelectric beverage cooler
Peltier technology opens new opportunities for specialapplications. In the current project, this technology was appliedto design and fabricate a portable thermoelectric beveragecooler and thermoelectric cup. The simulation and results of theexperiment showed that the common beverage cooler is not asuitable design for ignoring the effect of natural convection in<br ...
full textFluid Flow and Heat Transfer of Nanofluids over a Flat Plate with Conjugate Heat Transfer
The falling and settling of solid particles in gases and liquids is a natural phenomenon happens in many industrial processes. This phenomenon has altered pure forced convection to a combination of heat conduction and heat convection in a flow over a plate. In this paper, the coupling of conduction (inside the plate) and forced convection of a non-homogeneous nanofluid flow (over a flat plate) ...
full textMicro thermoelectric cooler: Planar multistage
A suspended, planar multistage micro thermoelectric (TE) cooler is designed using thermal network model to cool MEMS devices. Though the planar (two-dimensional) design is compatible with MEMS fabrication, its cooling performance is reduced compared to that of a pyramid (three-dimensional) design, due to a mechanically indispensable thin dielectric substrate (SiO2) and technical limit on TE fil...
full textHeat Transfer in Thermoelectric Materials and Devices
Article is made available in accordance with the publisher's policy and may be subject to US copyright law. Please refer to the publisher's site for terms of use. The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters. Solid-state thermoelectric devices are currently used in applications ranging from thermo-couple sensors to power g...
full textHeat Transfer Enhancement in Thermoelectric Power Generation
Heat transfer plays an important role in thermoelectric (TE) power generation because the higher the heat-transfer rate from the hot to the cold side of the TE material, the higher is the generation of electric power. However, high heat-transfer rate is difficult to achieve compactly when the hot and/or the cold sources are maintained by a flow of gas such as waste heat from the gas exhaust of ...
full textMy Resources
Save resource for easier access later
Journal title:
energy equipment and systemsISSN 2383-1111
volume 3
issue 2 2015
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023