Exact Localization of Planar Acoustic Reflectors in Three-Dimensional Geometries
نویسندگان
چکیده
In this paper we propose a methodology for localizing acoustic planar reflectors in a 3D geometry, using acoustic measurements acquired by a set of microphones. An acoustic source emitting a known signal is placed close to the wall to be identified, and is used for estimating the source-to-microphone impulse responses. In a preliminary step, such estimates are employed for localizing the source. After that, the Times Of Arrival (TOAs) associated to the first order reflective paths are extracted from the impulse responses and converted into quadratic constraints (ellipsoids) acting on the reflective plane. The constraints are then collected into a cost function, whose exact minimization leads to the searched plane. A theoretical analysis is performed for predicting the impact of measurement errors on the estimation. Moreover, experimental results in a real meeting room prove the effectiveness of the method.
منابع مشابه
Three Dimensional Localization of an Unknown Target Using Two Heterogeneous Sensors
Heterogeneous wireless sensor networks consist of some different types of sensor nodes deployed in a particular area. Different sensor types can measure different quantity of a source and using the combination of different measurement techniques, the minimum number of necessary sensors is reduced in localization problems. In this paper, we focus on the single source localization in a heterogene...
متن کاملExact Photoacoustic Image Reconstruction using a Planar Sensor Array and Image Sources
Photoacoustic imaging with planar sensor arrays suffers from a finite aperture or limited view problem due to the fact that the sensor array is finite in size, whereas exact reconstruction algorithms require that it occupies the entire infinite plane. Here, acoustic reflectors are proposed as a means of reflecting the acoustic waves, that would otherwise not be measured, back onto the sensor, a...
متن کاملAnalysis of Radial Baffle Effects on Acoustic Characteristics of a Combustion Chamber
An efficient finite volume approach has been used to develop a three dimensional Helmholtz acoustic solver for complex geometries. This acoustic solver was utilized to obtain characteristic mode shapes and frequencies of a baffled combustion chamber. An experimental setup, including stationary and moving sensors, has also been used to measure these quantities for the same model combustion chamb...
متن کاملPhotoacoustic imaging using acoustic reflectors to enhance planar arrays.
Planar sensor arrays have advantages when used for photoacoustic imaging: they do not require the imaging target to be enclosed, and they are easier to manufacture than curved arrays. However, planar arrays have a limited view of the acoustic field due to their finite size; therefore, not all of the acoustic waves emitted from a photoacoustic source can be recorded. This loss of data results in...
متن کاملThe use of acoustic reflectors to enlarge the effective area of planar sensor arrays
Planar sensor arrays have many advantages including ease of manufacture and low cost. However, when used for photoacoustic (PA) imaging, planar sensors have a limited view of the acoustic field, which means some of the waves from the PA source are not recorded. This results in artifacts in the reconstructed image of the PA source (the initial acoustic pressure distribution). In this paper, we d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012