Characteristics of Momentum Sources and Sinks in Turbulent Channel Flow
نویسندگان
چکیده
The wall-normal gradient of Reynolds shear stress, denoted ∂T+/∂y+, may be thought of as a momentum source or sink term (depending on its sign). This quantity represents a critical driver of the dynamics of wall-turbulence that give rise to the mean velocity distribution. While there have been a number of studies concerning the statistics of ∂T+/∂y+, there remains much to discover regarding the flow features and their interactions that contribute to ∂T+/∂y+. The aim of the present work is to investigate the velocity–vorticity correlations that comprise the Reynolds shear stress gradient. Results show velocity–vorticity correlations rapidly change behaviour up to the location of peak Reynolds shear stress. Beyond this point, the qualitative behaviour remains similar throughout the turbulent flow. Interestingly, it was found from two-point correlations that the mean Reynolds stress gradient at any wall-normal location results from only slight asymmetry in the velocity–vorticity correlations. This suggests that the mean momentum balance is extremely sensitive to the structural features and/or interactions that are responsible for vorticity transport throughout the turbulent layer.
منابع مشابه
Numerical Study of Reynolds Number Effects on Flow over a Wall-Mounted Cube in a Channel Using LES
Turbulent flow over wall-mounted cube in a channel was investigated numerically using Large Eddy Simulation. The Selective Structure Function model was used to determine eddy viscosity that appeared in the subgrid scale stress terms in momentum equations. Studies were carried out for the flows with Reynolds number ranging from 1000 to 40000. To evaluate the computational results, data was compa...
متن کاملCooling Performance Analysis of Water-Cooled Heat Sinks with Circular and Rectangular Minichannels Using Finite Volume Method
In this paper, the cooling performance of water-cooled heat sinks for heat dissipation from electronic components is investigated numerically. Computational Fluid Dynamics (CFD) simulations are carried out to study the rectangular and circular cross-sectional shaped heat sinks. The sectional geometry of channels affects the flow and heat transfer characteristics of minichannel heat sinks. T...
متن کاملAnalysis of the Characteristics, Physical Concepts and Entropy Generation in a Turbulent Channel Flow Using Vortex Blob Method
In this paper, using vortex blob method (VBM), turbulent flow in a channel is studied and physical concepts of turbulence are obtained and discussed. At first, time-averaged velocities, and , and then their fluctuations are calculated. To clarify turbulence structures, velocity fluctuations and are plotted. It is observed that turbulence structures occupy different positions and move with con...
متن کاملOptimum Design of Interbasin Pipe System (RESEARCH NOTES)
Pipe systems are often used to transfer moderate to medium water volumes between reservoirs or from well fields to consumers. Such systems consisting of an arbitrary number of reservoirs or other types of sources and sinks are considered here. The Lagrangean optimization principle is used for the determination of all pipe diameters giving minimum total cost of the system, when the individual di...
متن کاملAssessment of Turbulent Models in Computation of Strongly Curved Open Channel Flows
Several rigorous turbulent models have been developed in the past years and it can be seen that more research is needed to reach a better understanding of their generality and precision by verifying their applications for distinct hydraulic phenomena; under certain assumptions. This survey evaluates the performance of Standard k-ε, Realizable k-ε, RNG k-ε, k-ω and RSM models in predicting flow ...
متن کامل