Self-tuning Generalized Predictive Control with Input Constraints
نویسندگان
چکیده
The handling of various input constraints in the self-tuning generalized predictive control (STGPC) problem of ARIMAX/ARMAX systems is considered. The methods based on the Lagrange multipliers and Lemke’s algorithm are used to solve the constrained optimization problem. A self-tuning controller is implemented in an indirect way, and the considered constraints imposed on the control input signal are of the rate, amplitude and energy types. A comparative simulation study of self-tuning control system behaviour is given with respect to the design parameters and constraints. The stability of a closed-loop control system is analyzed and the computational loads of both the methods are compared.
منابع مشابه
Fault-Tolerant Control of a Nonlinear Process with Input Constraints
A Fault-Tolerant Control (FTC) methodology has been presented for nonlinear processes being imposed by control input constraints. The proposed methodology uses a combination of Feedback Linearization and Model Predictive Control (FLMPC) schemes. The resulting constraints in the transformed process will be dependent on the actual evolving states, making their incorporation in the de...
متن کاملA Microcontroller-Based Adaptive Model Predictive Control Platform for Process Control Applications
Model predictive control (MPC) schemes employ dynamic models of a process within a receding horizon framework to optimize the behavior of a process. Although MPC has many benefits, a significant drawback is the large computational burden, especially in adaptive and constrained situations. In this paper, a computationally efficient self-tuning/adaptive MPC scheme for a simple industrial process ...
متن کاملSelf-tuning Weighting Factor to Decoupling Control for Incubator System
This paper is focused on a design of an algorithm for decoupling multivariable systems based on generalized predictive control (DGPC) and its application to a control of an incubator system. Proposed control algorithm uses adaptive error weighting factor in cost function in order to reduce coupling between control loops. Two techniques are presented and compared for predictive control of TITO (...
متن کاملHysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation
In this paper, hysteretic behavior modeling, system identification and control of a mechanism that is actuated by shape memory alloy (SMA) wires are presented. The mechanism consists of two airfoil plates and the rotation angle between these plates can be changed by SMA wire actuators. This mechanism is used to identify the unknown parameters of a hysteresis model. Prandtl–Ishlinskii method is ...
متن کاملContinuous-time anti-windup generalized predictive control of non-minimum phase processes with input constraints
This paper deals with a design problem of a continuous-time anti-windup generalized predictive control system using coprime factorization approach for nonminimum phase processes with input constraints. Based on the proposed design scheme, a condition for stability of the closed-loop system with input constraints and a straightforward method t.o improve the output response of the system with inp...
متن کامل