Direct Imaging of Submicron Scale Defect-induced Birefringence in SrTiO3 Bicrystals
نویسندگان
چکیده
Using a near-field scanning optical microscope capable of quantitative polarimetry, we map the anisotropic strain fields associated with individual submicron defects near the fusion boundaries of SrTiO3 bicrystals. Many defects exhibit unexpected spiral-shape strain patterns, whose handedness is believed to be linked to the bicrystal synthesis process. Direct observation of these defect-induced strain fields helps explain previously observed nonuniformity in the characteristics of high temperature superconductor grain boundary junctions fabricated on SrTiO3 bicrystals. PACS numbers: 61.72.Hh, 07.79.Fc, 78.20.Fm, 61.72.Mn Typeset using REVTEX
منابع مشابه
Current–Voltage Characteristics Across Small Angle Symmetric Tilt Boundaries in Nb-Doped SrTiO3 Bicrystals
Grain boundary structure and current–voltage (I –V ) characteristics were investigated for Nb-doped SrTiO3 bicrystals having small angle tilt boundaries with misorientation angles of 2◦ and 4◦ against [001]. The bicrystals were fabricated by using hot-joining technique at 1400◦C for 10 h under a pressure of 0.4 MPa. High resolution transmission electron microscopy study revealed that the joined...
متن کاملFormation of Strontium Titanate Bicrystal by the Spark Plasma Sintering Method
Spark plasma sintering (SPS) is a technique used for enhanced consolidation of powdered compacts by utilization of pulsed direct current and high uniaxial pressure. Physical mechanisms for densification of these powders as well as subsequent grain growth anomalies are debated in literature [1]. Limited information is available regarding the influence of electric fields on grain boundary formati...
متن کاملAn Optimum Routine for Surface Modification of Ceramic Supports to Facilitate Deposition of Defect-Free Overlaying Micro and Meso (Nano) Porous Membrane
In this work, a simple and effective way to modify the support surface is developed and a nanostructure ceramic support to facilitate deposition of a defect-free overlying micro and meso (nano) porous membrane is obtained. To achieve high performance nanocomposite membranes, average pore size of outer surface of support was reduced by dip-coating in submicron and nano α-alumina slurries. In...
متن کاملTunable Photonic Bandgap Devices Based on Pb-La-Zr-Ti-O/Sr-Ti-O Two Dimensional Multi-layers on GaAs Substrates
Multiple-layer perovskite Pb0.91La0.09Zr0.65Ti0.35O3/SrTiO3 (PLZT/STO) heterostructures have been grown by pulsed laser deposition (PLD) on (001) MgO/GaAs substrates. The perovskite layers are single phase with 35nm RMS roughness on the top surface. Electrically induced birefringence in the PLZT layers, resulted in both optical phase and optical amplitude modulation. The application of an elect...
متن کاملInvestigation of Thermal Dispersion and Thermally-Induced Birefringence on High-Power Double Clad Yb:Glass Fiber Laser
In this work the effects of heat generation on the modes of Yb:Glass double clad fiber laser were investigated. The thermal dispersion and thermally-induced birefringence were considered when the gain medium becomes an anisotropic medium. The results showed considerable modifications of laser modes profiles, in particular for transfer magnetic (TM) and transfer electric (TE) modes which their p...
متن کامل