Investigations on Laser Induced Nickel and Titanium Plasmas
نویسندگان
چکیده
Experiments were performed to find out plasma parameters for Nickel and Titanium metals which were irradiated in air (1 atm) to produce plasma plume using Q switched Nd: YAG pulsed laser of 1.1 MW, 10 m J, 1064 nm and 9-14 ns. Langmuir probe was used as a diagnostic tool. The signals at different probe voltages were recorded on digital storage oscilloscope. The information carried by the signals was utilized to calculate electron density, electron temperature, Debye’s length and number of particles in Debye’s sphere. The study shows that the calculated values of these parameters for Nickel and Titanium are different except Debye’s length. Plasma parameters strongly depend on probe potentials, material used and ambient conditions.
منابع مشابه
Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique
Titanium and titanium alloys are often used in orthopedic surgery and dentistry because of their especial characteristics such as biocompatibility, mechanical properties, and corrosion resistance. However, their bio- inertness is the most serious drawback for biomedical applications. Therefore, a bioactive coating like hydroxyapatite (HA) is coated on their surface. In this regard, in the prese...
متن کاملLaser-assisted metal spinning for an efficient and flexible processing of challenging materials
The demand for components made from high performance materials like titanium or nickel-based alloys as well as strain-hardening stainless steel is steadily increasing. However, conventional forming operations conducted on these materials are generally very laborious and time-consuming. This is where the limitations of metal spinning also become apparent. Using a laser to apply heat localized to...
متن کاملLaser-induced breakdown spectrometry of titanium dioxide antireflection coatings in photovoltaic cells.
Silicon photovoltaic cells have design and material requirements different from those of most other silicon electronic devices. Not only are nearly ideal silicon surfaces required, but also the bulk properties must be of uniform high quality for high-energy conversion efficiency. In this paper, emission spectra of laser-generated plasmas from titanium dioxide antireflection coatings in solar ce...
متن کاملRapid prototyped porous nickel–titanium scaffolds as bone substitutes
While calcium phosphate-based ceramics are currently the most widely used materials in bone repair, they generally lack tensile strength for initial load bearing. Bulk titanium is the gold standard of metallic implant materials, but does not match the mechanical properties of the surrounding bone, potentially leading to problems of fixation and bone resorption. As an alternative, nickel-titaniu...
متن کاملPrediction of machining induced residual stresses in turning of titanium and nickel based alloys with experiments and finite element simulations
Titanium and nickel alloys represent a significant metal portion of the aircraft structural and en components and the residual stresses induced by machining are very critical due to safety sustainability concerns. This paper presents experimental investigations and finite element simulat on turning of Ti–6Al–4V titanium alloy and IN100 nickel based alloy with uncoated and TiAlN co tools. Face t...
متن کامل