Statistical Analysis of the Dynamic Mean Excitation for a Spur Gear
نویسندگان
چکیده
An innovative statistical methodology and generic expressions have been developed for the ratio of the dynamic mean excitation to the transmitted mean load under the influence of the important gear characteristics. Simple expressions have been established for identifying cases in which the dynamic mean excitation is more than, less than, or equal to the transmitted mean load. fDOI: 10.1115/1.1891812g
منابع مشابه
A Comparative Study of Tooth Wear, Mechanical Power Losses and Efficiency in Normal and High Contact Ratio Asymmetric Spur Gears
The surface tooth wear which occurs at the gear contact region due to inadequate contact strength of the tooth is one of the predominant modes of gear failures. Currently, higher contact ratio spur gears are increasingly used in power transmission applications such as aircraft, wind turbine, automobiles and compact tracked vehicles due to their high load carrying capacity. In this work, the di...
متن کاملA Study of Precision Forging of Steel Spur Gears: Upper Bound Model and Experiments
Precision forging process is widely used for the production of spur gears due to its advantages such as improved strength and surface finish, little waste of materials and reduction in the machining time of the gear. An important aspect of precision forging process is the load required to perform the process successfully and design the forging tools. In this research, a new kinematically admiss...
متن کاملInfluence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کاملتحلیل کرانه فوقانی اکستروژن مستقیم چرخ دنده های ساده باپروفیل دندانه اصلاح شده
This paper describes an upper bound analysis of cold forward extrusion of spur gears with modified tooth profile. Spur gear geometrical parameters such as module, number of teeth, pressure angle, bore radius and addendum modification factor were input to a computer program written in Visual Basic. Then spur gear, billet and extrusion die cavity were modeled automatically in SolidWorks. For uppe...
متن کاملMathematical Model and Vibration Analysis of Aircraft with Active Landing Gear System using Linear Quadratic Regulator Technique
This paper deals with the study and comparison of passive and active landing gear system of the aircraft and dynamic responses due to runway irregularities while the aircraft is taxying. The dynamic load and vibration caused by the unevenness of runway will result in airframe fatigue, discomfort of passengers and the reduction of the pilot’s ability to control the aircraft. One of the objectiv...
متن کامل