Software for Correcting the Dynamic Error of Force Transducers

نویسندگان

  • Naoki Miyashita
  • Kazuhide Watanabe
  • Kyouhei Irisa
  • Hiroshi Iwashita
  • Ryosuke Araki
  • Akihiro Takita
  • Takao Yamaguchi
  • Yusaku Fujii
چکیده

Software which corrects the dynamic error of force transducers in impact force measurements using their own output signal has been developed. The software corrects the output waveform of the transducers using the output waveform itself, estimates its uncertainty and displays the results. In the experiment, the dynamic error of three transducers of the same model are evaluated using the Levitation Mass Method (LMM), in which the impact forces applied to the transducers are accurately determined as the inertial force of the moving part of the aerostatic linear bearing. The parameters for correcting the dynamic error are determined from the results of one set of impact measurements of one transducer. Then, the validity of the obtained parameters is evaluated using the results of the other sets of measurements of all the three transducers. The uncertainties in the uncorrected force and those in the corrected force are also estimated. If manufacturers determine the correction parameters for each model using the proposed method, and provide the software with the parameters corresponding to each model, then users can obtain the waveform corrected against dynamic error and its uncertainty. The present status and the future prospects of the developed software are discussed in this paper.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nonlinear Dynamic Modeling and Hysteresis Analysis of Aerospace Hydro - dynamical Control Valves

A new procedure for deriving nonlinear mathematical modeling for a specific class of aerospace hydro - mechanical control valves is presented. The effects of friction on the dynamic behavior of these types of valves along with the experimental verifictions are also given. The modeling approach is based on the combination of the following three tasks: decomposition of the valve into simple speci...

متن کامل

Dynamic Error Correction of Force Sensor

The author has proposed a method, the Levitation Mass Method (LMM). In the LMM, the inertial force of a mass levitated using a pneumatic linear bearing is used as the reference force applied to the objects under test, such as force sensors, materials or structures. The inertial force of the levitated mass is measured using an optical interferometer. The author has modified it as calibration met...

متن کامل

The Effects of Newmark Method Parameters on Errors in Dynamic Extended Finite Element Method Using Response Surface Method

The Newmark method is an effective method for numerical time integration in dynamic problems. The results of Newmark method are function of its parameters (β, γ and ∆t). In this paper, a stationary mode I dynamic crack problem is coded in extended finite element method )XFEM( framework in Matlab software and results are verified with analytical solution. This paper focuses on effects of main pa...

متن کامل

Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...

متن کامل

Performance Analysis of an Industrial Robot Under Uniform Temperature Change

The effect of temperature change on dynamic performances of an industrial robot with six axes of freedom is studied in this paper. In general, the strain and stress are produced not only by the external exciting force, but also by temperature change. The strain energy that is caused by temperatureThis paper describes how the temperature variation effects the dynamic performance of an indu...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 14  شماره 

صفحات  -

تاریخ انتشار 2014