Morphometry and strain distribution in guinea pig duodenum with reference to the zero-stress state.

The aim of the present study is to determine the distribution of residual circumferential strains along the duodenum in anesthetized guinea pigs. A silicone elastomer was allowed to harden in the duodenal lumen under a pressure of 0.7 kPa. The duodenum was excised with the cast and photographed. The zero-stress state was obtained by cutting rings of duodenum radially. The geometric configuration at the zero-stress state is of fundamental importance, because it is the basic state with respect to which the physical stresses and strains are defined. A basic piece of information is the way the tangent vector rotates from one end of the circumference to the other. In the duodenum at zero-stress state, the total rotation of the tangent from one tip to the other is -500 to -850°, with the lowest absolute value in the proximal duodenum. In other words, the duodenum usually turns itself inside out on changing from a loaded state to the zero-stress state. The serosal circumference, the duodenal wall thickness, and the ratio of wall thickness to mucosal circumference decreased in the distal direction. In the pressurized state, the serosal Cauchy strain was tensile and increased in the distal direction; the mucosal Cauchy strain was compressive in the proximal half of the duodenum and tensile in the distal half. The large circumferential residual strains must be taken into account in a study of physiological problems in which the stresses and strains are important, e.g., the bolus transport function.